Skip to content
Free Shipping over $299 | Contact Us for Deals
Free Shipping over $299 | Contact Us for Deals

Empire 4" x 7" Vertical Direct Vent Fireplace Kit

SKU DVVK4FV
Original price $1,024.00 - Original price $1,024.00
Original price
$1,024.00
$1,024.00 - $1,024.00
Current price $1,024.00

Free Shipping over $299


Please contact us directly to request quote for Empire products. 

  • FREE SHIPPING : All Over United States over $299

  • SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com

Empire 4" x 7" Vertical Direct Vent Fireplace Kit

The Empire DVVK4FV is a vertical flex vent termination kit for Empire direct-vent fireplaces listed for it. It runs 4" x 7" flex vent from the fireplace up to a 48" rigid section and cap through the roof, and must end vertically.

Fits

Empire fireplaces on our site whose pages or manuals list the DVVK4FV.

Related Parts

Specifications

Model numbers DVVK4FV
Kit parts (sheet 21552) 4"/7" vertical cap, roof support kit, 6 ft each of 4" and 7" aluminum flex, 4"/7" x 48" rigid pipe, firestop/thimble, roof flashing (0/12 to 6/12), 7" flex adapter collar with gasket, two 7" storm collars, five spacer springs, clamps, screws and high-temperature silicone
Height with this kit alone (sheet) Up to 13 ft, including the fireplace
Maximum vent length (sheet) 35 ft total, with DVEK10 or DVEK25 extension kits
Flex 4" flue inside a 7" air intake

Installation Notes

  • Runs: the flex can leave the fireplace vertically or horizontally and may include two 90° bends, but must terminate vertically. Any horizontal section needs a 1/4" rise per foot toward the cap.
  • Clearances (sheet): 3" above and 1" at the sides and bottom of horizontal runs; 1" around the pipe at the roof. The ceiling opening is at least 9-1/2" x 9-1/2", and the cap must end at least 12" above the roof.
  • Supports (sheet): strap horizontal runs every 2 ft and vertical runs every 3 ft.
  • Flex rules: do not mix the flex with rigid pipe sections or join flex lengths without approved connectors, and never connect the kit to a flue serving another appliance.
  • Loft fireplaces: the Loft manual says the DVVK4FV requires the SD46DVAFCFX7 adaptor.
  • Installation: must be installed by a qualified installer following the fireplace manual and local codes. In Massachusetts, gas work must be done by a licensed plumber or gas fitter.

Downloads

Warranty

Empire's warranty in the fireplace's installation manual covers remote controls, thermostats, accessories and replacement parts for 1 year (parts), for the original purchaser. Full terms are in the warranty section of the installation manual.