Empire 10ft. Direct Vent Pipe Extension Kit

Empire 10ft. Direct Vent Pipe Extension Kit

The Empire DVEK10 is a 10 ft flex vent extension kit for the DVVK4FV vertical flex vent kit, for vertical runs longer than the DVVK4FV alone reaches.

Fits

Empire fireplaces on our site that take the DVVK4FV vertical flex vent kit.

• Empire Boulevard: 36", 48"
• Empire Loft: 36", 46"
• Empire Tahoe Clean Face Deluxe: 32", IP Control, 32", Millivolt, 36", IP Control, 36", Millivolt, 42", IP Control, 42", Millivolt
• Empire Tahoe Luxury: 36"
• Empire Tahoe Peninsula: 36"
• Empire Tahoe See-Through: 36"

Related Parts

• DVVK4FV vertical flex vent kit (DVVK4FV)
• DVEK25 25 ft extension kit (DVEK25)

Specifications

Installation Notes

• Flex rules: join flex lengths only with the approved connectors in the kit, and do not mix flex with rigid pipe sections (DVVK4FV sheet).
• Supports (DVVK4FV sheet): strap horizontal runs every 2 ft and vertical runs every 3 ft; any horizontal section needs a 1/4" rise per foot toward the cap.
• Installation: must be installed by a qualified installer following the fireplace manual and local codes. In Massachusetts, gas work must be done by a licensed plumber or gas fitter.

Downloads

• Installation Instructions, DVVK-4FV Vertical Flex Termination Kit (21552)

Warranty

Empire's warranty in the fireplace's installation manual covers remote controls, thermostats, accessories and replacement parts for 1 year (parts), for the original purchaser. Full terms are in the warranty section of the installation manual.