Empire Tahoe Deluxe 36" Direct Vent Gas Fireplace
The Empire Tahoe Deluxe 36" (model numbers DVD36FP30, DVD36FP31, DVD36FP70 and DVD36FP71, each ending N for natural gas or P for propane) is a zero-clearance direct-vent gas fireplace with a traditional louvered face. A contour-style burner carries a hand-painted set of five ceramic fiber logs, and the firebox is only 16 3/8" deep, so it fits shallow wall cavities.
Millivolt models (FP30, FP31) run the burner without house power. Intermittent pilot models (FP70, FP71) use electronic ignition with battery backup. Models ending 31 and 71 come with the blower installed.
Key Features
- Up to 20,000 Btu/hr input on natural gas or propane
- Five-piece ceramic fiber log set on a contour-style burner, included
- Millivolt or intermittent pilot control
- Blower included on FP31 and FP71 models; an FBB4 blower can be added to the others
- 16 3/8" depth for shallow wall cavities
- 4" x 6 5/8" direct venting from the top or the rear
- Zero clearance to combustibles at the back, sides and floor
- Optional liners: aged brick, stacked limestone, herringbone brick or black porcelain
What to Order With It
The fireplace ships with its log set. It needs a front before it can run.
Required (choose one front):
Optional – Liners:
Optional – Door set (requires the Door Frame with Barrier, DVWB2BL):
Optional – Outer frame and bottom trim:
Optional – Louvers:
Optional – Remotes and wall controls:
-
Remote, Battery Receiver/Remote, On/Off (FRBC)
-
Remote, Battery Receiver/Remote, Thermostat (FRBTC2)
-
Remote, Electric Receiver/Battery Remote, On/Off (FREC)
-
Remote, Battery Receiver/Remote, TouchScreen, Programmable (FRBTPS)
-
Wall Switch, On/Off (FWS1)
-
Wall Thermostat, Reed Switch (TMV)
-
Wall Thermostat, Wireless (TRW)
Optional – Variable remote kit (intermittent pilot models):
Optional – Accessories:
Optional – Vent kits:
Optional – Conversion kits:
Specifications
| Model numbers |
DVD36FP30N, DVD36FP30P, DVD36FP31N, DVD36FP31P, DVD36FP70N, DVD36FP70P, DVD36FP71N, DVD36FP71P |
| Framing (rough opening) |
37 3/8" W x 35 3/4" H x 16 3/8" D; add 3 3/4" to the height when using a flush mantel base |
| Appliance dimensions |
37" W x 35 5/8" H x 16 3/8" D (32 3/4" H without the top standoffs) |
| Fuel |
Natural gas (N) or propane (P) |
| Input, maximum |
20,000 Btu/hr, natural gas and propane |
| Input, minimum (millivolt models) |
14,000 Btu/hr natural gas; 16,500 Btu/hr propane |
| Venting |
Direct vent, 4" x 6 5/8", top or rear |
| Control |
Millivolt standing pilot (FP30, FP31); intermittent pilot (FP70, FP71) |
| Blower |
Included on FP31 and FP71 |
| Gas connection |
1/2" NPT |
| Installation type |
Zero clearance |
| Listing |
ANSI Z21.88 |
| High altitude |
Above 2,000 ft in the US the input may need to be reduced with a smaller orifice; see the manual |
| Manufactured (mobile) home |
May be installed in an aftermarket, permanently located manufactured home (USA only) where local codes allow |
| Shipping weight |
102 to 105 lb, depending on model |
| Style |
Traditional |
Installation Requirements
-
Clearances to combustibles: back 0", sides 0", floor 0", top standoffs 0", top framing edge 3".
-
Ceiling: at least 36" from the top front edge of the fireplace to the ceiling.
-
Side wall: at least 6" from the side of the fireplace to an adjacent side wall.
-
Mantel: follow the mantel chart in the installation manual for any combustible mantel or projection above the unit. Only non-combustible material may cover the black fireplace front.
-
Framing: the 35 3/4" framing height includes a 3" space for the top standoffs. The finished wall must cover that 3" opening above the firebox, so plan the facing before you frame.
-
Floor: on carpet, tile or any combustible floor other than wood, set the fireplace on a metal or wood panel the full width and depth of the unit.
-
Venting: 4" x 6 5/8" direct vent, top or rear. The horizontal run can be up to 20 ft; island and room-divider installs need at least 8 ft of vertical rise. Check the vent graph in the manual for your layout.
-
Power: millivolt models need no electricity to run the burner. Intermittent pilot models run on an AC adapter with battery backup. Blower models need an electrical supply for the blower; see the wiring section of the manual.
-
Installation: must be installed by a qualified installer per the installation manual and local codes.
Options & Accessories
Decorative Louvers
Arch louvers
Mission louvers
Door Sets (require the Door Frame with Barrier)
Rectangle
Mission rectangle
Arch
Mission arch
Outer Frame Finishes
Matte black (shown on a cherry mantel)
Hammered pewter (shown on an oak mantel)
Liners
Liner samples from Empire's range. Availability varies by model; the ones that fit this fireplace are listed under What to Order With It.
Downloads
Warranty
Empire limited parts warranty for Tahoe Deluxe fireplaces, from the warranty section of the installation manual:
- Factory-installed glass: limited lifetime
- Combustion chamber and heat exchanger: limited lifetime
- All other components, except remote controls, thermostats, lights, accessories and replacement parts: 3 years
- Remote controls, thermostats, lights, accessories and replacement parts: 1 year
The warranty covers parts for the original purchaser. Travel, diagnostic and freight charges are not covered. Full terms are in the warranty section of the installation manual.
