Skip to content
Free Shipping over $299 | Contact Us for Deals
Free Shipping over $299 | Contact Us for Deals

Superior WRT3042WSI 42" Radiant Wood-Burning Firebox, Insulated, White Stacked Refractory Panels

SKU WRT3042WSI
Superior authorized dealer
Original price $1,579.00 - Original price $1,579.00
Original price
$1,579.00
$1,579.00 - $1,579.00
Current price $1,579.00
Free shipping over $299To the lower 48 · most items ship in 1–2 business days
Up to 20% OFF

Black Friday Sale

Contact us for this item's sale price. Our team quotes it by phone, text or chat.

Ends Nov 27 · Some exclusions apply

Superior WRT3042WSI 42" Radiant Wood-Burning Firebox, Insulated, White Stacked Refractory Panels

The Superior WRT3042WSI brings a real wood fire indoors: a 42" radiant fireplace with a clean, smooth face and no louvers.

It burns wood through Superior's 8" double-wall chimney, and it also accepts vented gas logs if you ever want to switch.

The Superior WRT3042WSI: A Classic Radiant Wood Fireplace

The WRT3042WSI is the 42" radiant model in Superior's WRT/WCT3000 series of indoor wood-burning fireplaces, with a smooth face and no louvers around its 42" wide, 24" tall opening. The firebox is fully insulated and lined on the back, sides and floor with white stacked refractory panels, and the face has a textured powder-coat finish. Mesh fire screens pull out of hidden pockets, and a heavy-duty log grate, a damper handle on the upper front face and an adjustable outside air damper are built in.

It vents through Superior's 8" double-wall chimney, ordered separately: 8DM standard pipe, or 8HT hi-temp pipe, which is required in Canada. The fireplace has a 12" collar, and the 20" starter section that steps it down to 8" comes in the box. The chimney has to reach at least 14-1/2 feet from the base of the fireplace to the outlet of the cap.

It also accepts vented gas logs, or a vent-free gas log heater with Superior's GA6050 hood, and has gas line knockouts on both sides. For a louvered face that can take a fan or blower, see the WCT3042WSI; the 36" size is the WRT3036WSI. Superior's stainless steel WRE3042, with the same opening, is listed for outdoor and indoor use.

Compare it with our other wood-burning fireplaces, or see the full Superior fireplace lineup.

Features

  • Opening size: 42" wide, 24" tall opening; inside, 39" wide at the front, 29-1/2" at the back and 16-1/4" deep.
  • Wood burning: an open fireplace built for indoor installation.
  • Radiant face: smooth, with no louvers.
  • Firebox liner: white stacked refractory panels on the back, sides and floor.
  • Insulated firebox: fully insulated for colder climates.
  • Log grate: heavy-duty.
  • Screens: mesh fire screens that pull out of hidden pockets.
  • Damper: handle on the upper front face.
  • Outside air: adjustable outside air damper, with an outside air kit connection on the left side.
  • Easy framing: full-length nailing flanges and drywall stops.
  • Finish: textured powder-coat finish.
  • Chimney: 12" collar with the 20" starter section included, for Superior's 8" double-wall chimney: 8DM standard or 8HT hi-temp.
  • Gas log ready: approved for vented gas logs, or vent-free gas logs with Superior's GA6050 hood, with gas line knockouts on both sides.
  • 20 year limited warranty: covers the fireplace body and firebox.

What's Included

  • Fireplace with white stacked refractory panels
  • Mesh fire screens in hidden screen pockets
  • Heavy-duty log grate and grate retainers
  • Damper and adjustable outside air damper
  • Chimney starter collar and 20" SS-8DM starter section (12" to 8")
  • Two ember protectors for the front edge
  • Installation and operation manual and homeowner's guide

What to Order With It

Required – Chimney pipe, ordered separately:

Required – Chimney cap (pick one; square tops are for chases only):

  • Round top, mesh screen: RT-8DM, or RT-8HT for hi-temp pipe
  • Round top, louvered screen: RLT-8DM, or RLT-8HT for hi-temp pipe
  • Round top with slip section, mesh screen: RTT-8DM, or RTT-8HT for hi-temp pipe
  • Round top with slip section, louvered screen: RLTT-8DM, or RLTT-8HT for hi-temp pipe
  • Square chase top: ET-8DM, or ET-8HT for hi-temp pipe
  • Square chase top with slip section: ETL-8DM, or ETL-8HT for hi-temp pipe

As your chimney run needs:

Optional:

Specifications

Model WRT3042WSI
Superior item number F0666
Type Open wood-burning fireplace, factory-built, for indoor installation; radiant, smooth face
Fuel Wood; also approved for vented gas logs (ANSI Z21.60 or Z21.84) or a vent-free gas log heater (ANSI Z21.11.2) with the GA6050 hood
Opening 42" W x 24" H
Inside the firebox 39" wide at the front, 29-1/2" at the back, 16-1/4" deep, 24" high
Outside size 48" W x 41" H (46-3/4" to the top of the standoffs) x 22-1/2" D, plus a 5/8" face
Framed opening 49-3/4" W x 47-1/4" H x 23-1/2" D
Chimney collar 12-3/8" inside, 15" outside; the included 20" SS-8DM starter section steps it down to 8DM or 8HT chimney
Liner White stacked refractory panels on the back, sides and floor
Face Smooth, no louvers
Finish Textured powder coat
Insulation Fully insulated firebox
Screens Mesh, in hidden screen pockets
Grate Heavy-duty log grate
Damper Handle on the upper front face
Outside air Adjustable outside air damper; AK4, AK4X or AK4F kit connects on the left side
Gas line 1/2" black iron pipe knockouts on both sides, for gas logs or a log lighter
Listing UL 127 / ULC-S610 factory-built fireplace (PFS report F10-078)
Warranty 20 year limited (see Warranty below)

There is no Btu rating for an open wood fire; the heat depends on the wood and the size of the fire. Superior intends it for supplemental heat, not as a replacement for a furnace.

Dimensions and Framing

Fireplace dimensions

Opening width 42"
Opening height 24"
Base to the bottom of the opening 8"
Overall width 48"
Height to the top of the face 41"
Height to the top of the standoffs 46-3/4"
Width at the back 36"
Depth, not counting the 5/8" face 22-1/2"

Inside the firebox

Front width 39"
Rear width 29-1/2"
Depth 16-1/4"
Height 24"

Framing

Opening width 49-3/4"
Opening height 47-1/4"
Depth 23-1/2"
Corner installation, along each wall from the corner 59-3/8"
Corner installation, across the front from wall to wall 83-7/8"

Slide the fireplace back into the framed opening until the nailing flanges touch the side framing, shim it level and square with sheet metal, and fasten it through the side flanges with screws or nails. Keep 3/4" between the framing and the back and sides (not needed at the nailing flanges); framing can touch the top spacers. Turn the 2x4 header on its edge above the fireplace. Install it square and plumb so glass doors line up.

Installation Requirements

  • Chimney parts: use only Superior's (IHP) 8DM or 8HT chimney parts. Other brands void the warranty and the listing. In Canada, 8HT hi-temp pipe and a Cold Air Climate Kit are required; the kit is recommended in cooler parts of the US.
  • Chimney height: at least 14-1/2 feet from the base of the fireplace to the flue outlet of the cap for a straight chimney or one with a single offset, and 22 feet with two offsets; 50 feet at most. No more than 6 feet of angled pipe between an offset and its return, and no more than two angled runs. A chimney over 20 feet tall needs its own support. Install the SS-8DM starter section first.
  • Through the roof: the cap must be at least 3 feet above where the chimney leaves the roof and 2 feet higher than any part of the roof within 10 feet. Keep 1" between the pipe and anything combustible, put a firestop spacer at every floor or ceiling the chimney passes through, add a firestop thimble where it goes up into an attic, and never fill a chimney enclosure with blown insulation. Chase tops sharing a chase need 24" between centers and 18" of height difference.
  • Clearances: 3/4" at the back and sides (not needed at the nailing flanges), 0" at the top spacers and floor, and a perpendicular side wall at least 12" from the opening. Don't pack the air spaces with insulation.
  • Hearth extension: over a combustible floor, a non-combustible hearth extension must reach at least 20" in front of the opening and 12" past each side (66" x 20"), with a thermal conductivity (k) of 0.84 or less per inch of thickness; it can be finished with tile, brick, stone, slate, marble or concrete. Slide one of the supplied ember protectors under the front edge of the fireplace and seal the gap with non-combustible material. On a raised platform, make a Z-shaped ember protector from 28-gauge or heavier galvanized steel that reaches 1-1/2" under the fireplace.
  • Floor: on carpet, tile or any combustible floor other than wood, set the fireplace on a metal or wood panel covering its full width and depth.
  • Mantel and facing: no combustible trim or mantel within 12" of the opening, and anything combustible that sticks out more than 1-1/2" must be at least 15" above the top of the opening. Mantel legs can come up to the side edges of the black metal face if their projection stays within the limits shown in the installation manual. Drywall and other combustible board can butt against the sides and top of the face but must never overlap it. Brick, tile and other non-combustible materials can overlap the face, set with non-combustible mortar or adhesive, as long as they don't block any openings.
  • Combustion air: the room has to supply enough air for the fire. In a tight house, or one with large kitchen exhaust fans or other equipment that pulls air out, the fireplace can smoke or backdraft; provide make-up air or an outside air kit. An AK4 kit draws air through a sidewall and an AK4F through a vented crawl space; fit it during rough framing. The inlet can't end in an attic or garage or sit higher than 3 feet below the flue outlet of the cap.
  • Smoke detectors: Superior recommends them, ideally in a hallway next to the room, or as your local code requires.
  • Gas logs: vented gas logs must be listed to ANSI Z21.60 or Z21.84, with the damper removed or locked fully open and any glass doors fully open. A vent-free gas log heater must be listed to ANSI Z21.11.2 and needs Superior's GA6050 hood installed; never run one with the chimney removed, and don't swap the hood for one that comes with the logs. If wood has been burned, have a chimney sweep clean the firebox and chimney first. Gas runs in 1/2" black iron pipe through the knockout on either side, hooked up by a qualified service person and leak-tested with soapy water, never a flame. A certified gas log lighter can also be fitted.
  • Glass doors: use only doors certified for this fireplace, and run them fully open or fully closed, never partly open. The tempered glass handles a gradual rise to 550°F; don't build oversized fires, and keep flames off the glass.
  • Inserts: don't put a fireplace insert in it unless the insert's maker says it was tested with this fireplace.
  • Manufactured homes: it can go in a permanently located manufactured home or a mobile home where local codes allow, but never in a sleeping room of a mobile home.
  • Installation: check local codes and permits before you start, and have a qualified installer follow the installation manual.

Bring the Superior WRT3042WSI Home with Dreamwood Living

The WRT3042WSI suits a family room where you want a real wood fire in a framed, finished wall. Reach out to our team for help planning the chimney and finishing the face.

FAQs

Radiant or louvered: what's the difference?
The radiant WRT3042WSI has a smooth face and sends heat out through the opening. The louvered WCT3042WSI has rolled louvers above and below the opening, which make it a circulating fireplace, and it takes Superior's optional BK blower or BK3 fan. Both have the same opening, firebox, chimney and framing. On the louvered model, the hearth extension can't block the lower louvers and the mantel has to clear the top louvers.

What chimney does it need?
Superior's 8" double-wall chimney (8" inside, 12-3/8" outside): 8DM standard or 8HT hi-temp pipe, plus a round top or chase top cap, all listed above. It must reach at least 14-1/2 feet from the base of the fireplace to the flue outlet of the cap (22 feet with two offsets); the fireplace itself counts for 45" of that, and the starter section another 19". The cap must also clear the roof by 3 feet and any part of the roof within 10 feet by 2 feet.

Can I burn gas logs in it?
Yes. It is approved for vented gas logs listed to ANSI Z21.60 or Z21.84 (with the damper locked open and any glass doors open) and for vent-free gas log heaters listed to ANSI Z21.11.2, which need Superior's GA6050 black fireplace hood. Superior shows its Crescent Hill, Crescent Hill HD, Golden Oak, Boulder Mountain, Rugged Stack, Wild Timber, Granite Ridge and Silverstone Timber log sets with this series; check that the set fits inside the firebox (39" wide at the front, 29-1/2" at the back and 16-1/4" deep). There are gas line knockouts on both sides, and a certified gas log lighter can be installed for wood fires.

What should I burn?
Dry, seasoned hardwood, ideally seasoned for about a year, and about three logs on the grate at a time; overloading it only adds smoke. Manufactured firelogs are fine if they are made for fireplaces, but don't poke them while they burn. Never burn treated lumber, plywood, driftwood, charcoal, coal, trash or Christmas tree branches, and never start a fire with gasoline, lighter fluid or kerosene.

Does it need glass doors?
No. The mesh screens come with it. The BD42 bi-fold glass doors are an option; run them fully open or fully closed, and close the screen before closing the doors.

How close can a mantel be?
Keep combustible trim and mantels at least 12" from the opening, and anything combustible that sticks out more than 1-1/2" at least 15" above the top of the opening. Brick, stone or tile can overlap the face itself.

Anything to know about the first fires?
Let the refractory panels cure for 24 hours, then keep the first three or four fires small. Hairline cracks up to 1/64" wide in the panels are normal. Lock the damper fully open before lighting, and don't close it until the embers are completely out. Have the chimney inspected at least twice a year while you use the fireplace, and cleaned once creosote builds up to 1/8".

Documents & Downloads

Warranty

Superior's 20 Year Limited Warranty covers the WRT3042WSI against defects in materials and workmanship:

  • Fireplace body and firebox: 20 years
  • Refractory panels and fire screens: 2 years, repair or replacement (hairline cracks excluded)
  • Grate: 90 days, defects only (Superior treats grates as a wear item)
  • Optional glass doors: 90 days
  • Parts not listed: 90 days
  • Labor: paid at IHP rates for the covered part's warranty period, up to five years

Vent components, trim, paint and applied stains are not covered, and neither is damage from overfiring. Using chimney parts that aren't Superior's (IHP) voids the warranty. The warranty is for the original owner of a fireplace installed in the US. Full terms are in the warranty certificate.