Empire Aspen 60" Traditional Indoor Wood Burning Firebox
Free Shipping over $299
Please contact us directly to request quote for Empire products.
Free Shipping over $299
Please contact us directly to request quote for Empire products.
Nothing sets the mood in a room like a real wood fire, and the Empire Aspen 60" Traditional gives it plenty of space: a 60" wide by 38" tall opening that turns the fireplace wall into the center of the house.
Model number WB60FB0F is a UL 127 listed indoor wood burning firebox that comes with a pull screen and grate. You pick the look inside, a smooth concrete liner in one of four colors or hand-laid firebrick, so the fireplace suits the room around it.
At 60" wide and 38" tall, the opening puts a broad, tall wood fire on display with only the pull screen in front of it, and the concrete floor and front lip come in the crate to finish the firebox.
It suits a great room, family room or living room in a new build or a remodel where you can frame a chase and run a chimney. A mantel can sit 18" above the opening, and the installation manual allows the Aspen in a bedroom. It is not approved for manufactured homes.
For the install, it vents through Empire's 12" WB12V chimney, takes in combustion air from outside through two outside air kits, and needs a non-combustible hearth extension in front. On nights you would rather not haul wood, it accepts a vented gas log set or a vent-free gas log set certified for it.
Compare it with the other wood burning fireplaces we carry, or read our guide to types of wood burning fireplaces, which covers open, EPA-certified, insert and outdoor designs.
The interior liner, chimney, cap, outside air kits and hearth extension are ordered separately (see below).
Empire lists these as required to complete the fireplace. They are sold separately.
Required: interior, one smooth concrete liner kit
Or firebrick (2 crates required; Heat Stop mortar must be used with soapstone):
Required: chimney (12" Empire WB12V components):
Required: chimney cap (choose one):
Required: outside air (two kits):
Required: hearth extension (choose one):
Optional, for a shrouded chimney:
| Model number | WB60FB0F |
|---|---|
| Type | Indoor wood burning fireplace (factory-built firebox) |
| Fuel | Wood; processed firelogs only if evaluated for fireplace use; also accepts vented gas logs (ANSI Z21.60, up to 200,000 Btu/h) or vent-free gas logs (ANSI Z21.11.2) |
| Opening | 60" W x 38" H |
| Inside the firebox | 24 3/16" deep, 48 3/16" wide at the back |
| Outside size | 74 3/4" W x 77 3/8" H x 31" D (face 54 1/8" high) |
| Interior | Smooth concrete liner kit or firebrick, required, ordered separately |
| Included | Pull screen, grate, attic insulation shields, concrete floor and front lip |
| Chimney | Empire 12" WB12V components; 20 ft minimum (22 ft with two offsets), 90 ft maximum |
| Outside air | Two WBOAK outside air kits with 4" duct, required |
| Hearth extension | Required; at least 20" deep in front of the opening |
| Gas line | Gas line knockout; location under Dimensions and Framing |
| Listing | UL 127 |
| Warranty | Limited lifetime parts on the combustion chamber, 5 years limited labor (see Warranty below) |
Fireplace dimensions
| Face width | 74 3/4" |
|---|---|
| Face height | 54 1/8" |
| Overall height | 77 3/8" |
| Height to the chimney adapter collar | 82 7/16" |
| Depth | 31" |
| Floor to the bottom of the opening | 9 1/4" |
| Face to the center of the vent | 17 1/8" |
| Rear wall to the center of the vent | 13 7/8" |
Inside the firebox
| Opening width | 60" |
|---|---|
| Opening height | 38" |
| Depth | 24 3/16" |
| Rear width | 48 3/16" |
Gas line location
| Floor to the gas line opening | 11 13/16" |
|---|---|
| Face to the gas line opening | 16 1/4" |
| Rear wall to the gas line opening | 14 3/4" |
Framing and clearances
| Finished cavity depth, back wall to front framing | 31" minimum |
|---|---|
| Height to the framing header | 76 3/4" |
| Air space at the back and sides | 1 1/2" |
| Header brackets to header | 0" |
| Opening to a sidewall | 30" minimum |
| Mantel | 18" minimum above the opening, 10" maximum depth |
| Raised hearth, fireplace on the floor | 9 3/16" maximum to the top of the finished hearth |
| Chimney to framing | 2" air space |
Set the fireplace 1/2" out in front of the framing so its non-combustible face ends up flush with the drywall, level it with shims, and install the header only after the fireplace is in position. Do not pack the air spaces with insulation.
The interior sets the character of the Aspen 60" Traditional. A smooth concrete liner kit gives clean, even walls in gray (WBL60SGR), black (WBL60SBL), white (WBL60SWH) or mocha (WBL60SBR). For a classic brick look, two 50-piece crates of buff (WBL60BBK), red (WBL60RBK) or soapstone (WBL60SBK) split firebrick go in by hand; soapstone must be laid with Heat Stop mortar (WBBKM).
Top the chimney with a round (WB12VRCC), rain (WB12VRC) or black pyramid (WB12VPC) cap. To see how the Aspen compares with gas, electric and other wood models, browse our full fireplace collection.
The Aspen 60" Traditional is for homes where the fireplace is meant to be the heart of the room: a wide, tall wood fire, framed by a mantel or a full surround, in a new build or a remodel.
Reach out to our team and we will help you list the liner, chimney sections, cap, outside air kits and hearth extension for your build.
Which Aspen is right for me?
For indoors, choose between this Aspen 60" Traditional, with a 60" wide by 38" high opening, and the Aspen 60" Linear, with a long, low 60" by 24" opening. Both use the same chimney, outside air kits, firebrick and hearth extension. For a patio or outdoor room, Empire makes outdoor versions: the Aspen 60" Traditional Outdoor and the Aspen 60" Linear Outdoor.
Can I burn gas in it?
Yes, with a gas log set, gas insert or log lighter installed when the fireplace is built. Vented gas log sets must be certified to ANSI Z21.60, up to 200,000 Btu/h, with the damper locked fully open. Vent-free gas log sets must be certified to ANSI Z21.11.2 and have an automatic shut-off.
Does it need outside air?
Yes. It uses two WBOAK outside air kits, one on each side, connected with 4" flex duct of up to 20 ft each (up to 40 ft with 6" duct and an adapter). Insulate the duct to prevent frost condensation.
Can it go in a bedroom?
Yes. The installation manual allows it in sleeping rooms. It is not approved for manufactured housing.
Empire limited warranty, from the warranty section of the installation manual:
The warranty is for the original purchaser. Travel, diagnostic and freight charges and removal and reinstallation costs are not covered. Full terms are in the warranty section of the installation manual.