Empire 5" x 8" Galvanized 6" Vent Pipe

Empire 5" x 8" Galvanized 6" Vent Pipe

The Empire 58DVA-06 (Empire price list SD58DVA06) is a 6" length of DuraVent DirectVent Pro 5" x 8" galvanized direct-vent pipe for Empire direct-vent fireplaces that vent with 5" x 8" pipe. Empire also includes it in the DVVK5RP rear vent and DVVK5TP top vent kits.

Fits

Empire direct-vent fireplaces on our site that vent with 5" x 8" pipe. Check the venting section of your appliance's manual before ordering.

• Empire Boulevard: 60", 72"
• Empire Boulevard See-Through: 48"
• Empire Rushmore Clean Face: 36", 40", 50"
• Empire Rushmore See-Through: 40"
• Empire Tahoe Clean Face Luxury: 36", IP Control, 36", Millivolt, 36", Multi-Function, 42", IP Control, 42", Millivolt, 42", Multi-Function
• Empire Tahoe Clean Face Peninsula: 36"
• Empire Tahoe Clean Face See-Through: 36"
• Empire Tahoe Luxury: 42"
• Empire Tahoe Premium: 42", 48"

Related Parts

• 90° elbow (58DVA-E90)
• 45° elbow (58DVA-E45)
• Adjustable pipe, 3" to 7" (58DVA-08A)
• Ceiling firestop (58DVA-FS)
• Reducer, 5" x 8" to 4" x 6-5/8" (58DVA-X46)

Specifications

Installation Notes

• Vent limits: allowed lengths, elbows and termination clearances differ from one appliance to the next. Follow the venting section of your appliance's manual and the vent systems it approves.
• Clearances: the Rushmore manual calls for 3" from combustibles above horizontal 5" x 8" pipe and elbows, 1" at the sides and bottom, and 1" around vertical pipe where it passes through the roof.
• Supports: the Rushmore manual calls for a support every 3 ft of horizontal run, and wall brackets every 4 ft on vertical runs.
• Joints: seal the outer joints with aluminum tape, screws or silicone rated above 300 F; the inner flue joints need no sealant (Rushmore manual).

Downloads

• Installation Instructions, Rushmore DVCT36/40CBP95 (41416)
• Installation Instructions, Boulevard DVLL60BP92 (43147)