Empire Tahoe Clean-Face Luxury 36" Gas Fireplace, Millivolt
The Empire Tahoe Clean-Face Luxury 36" puts a full log fire behind a large ceramic glass window, and its clean face lets tile or other non-combustible material hide the outer edge for a built-in look.
It is a zero-clearance direct vent gas fireplace with millivolt control (model numbers DVCX36FP30N and DVCX36FP30P). The log set and barrier screen come with it.
The Empire Tahoe Clean-Face Luxury 36": The Top Trim in the Clean-Face Line
At up to 37,000 Btu/hr on natural gas and 34,000 Btu/hr on propane, the Luxury 36" has the most heat of any Tahoe Clean-Face 36", and the 32 7/8" x 24" ceramic glass frame opening shows off the logs. It vents 5" x 8" from the top.
On these millivolt models, a standing pilot runs the burner without house power, and the fireplace works with any of the optional remotes and wall controls. The FBB10 variable-speed blower and LK6 lighting kit can be added.
See how it compares with the other trims in our Empire Tahoe fireplaces collection, or browse all direct vent gas fireplaces.
Comparing trims? Our guide to the Empire Tahoe Deluxe vs. Premium vs. Luxury explains what each one adds. Our article on millivolt vs. electronic ignition compares the two control types.
Features
-
Ceramic glass: frame opening 32 7/8" x 24", with the barrier screen included.
-
Log set included: no separate log set to buy.
-
Clean-face design: tile or other non-combustible material can conceal the outer edge.
-
Heat output: up to 37,000 Btu/hr on natural gas and 34,000 Btu/hr on propane.
-
Control: millivolt standing pilot that runs without house power.
-
Blower and light: optional FBB10 variable-speed blower and LK6 lighting kit.
-
Top venting: 5" x 8" direct vent.
-
Fronts and liners: forged iron doors, beveled frames, and rustic brick, old world stone or black porcelain liners.
Package Contents
- Tahoe Clean-Face Luxury 36" fireplace for natural gas or propane (DVCX36FP30N and DVCX36FP30P)
- Log set
- Ceramic glass with barrier screen
Everything else is optional (see below).
What to Order With It
The fireplace ships with its log set and barrier screen. Everything below is optional.
Optional – Liners:
Optional – Fronts (fit over the included barrier screen):
Optional – Remotes and wall controls:
-
Remote, Battery Receiver/Remote, On/Off (FRBC)
-
Remote, Battery Receiver/Remote, Thermostat (FRBTC2)
-
Remote, Electric Receiver/Battery Remote, On/Off (FREC)
-
Remote, Battery Receiver/Remote, TouchScreen, Programmable (FRBTPS)
-
Wall Switch, On/Off (FWS1)
-
Wall Thermostat, Reed Switch (TMV)
-
Wall Thermostat, Wireless (TRW)
Optional – Accessories:
Optional – Vent kits:
Optional – Conversion kits:
Specifications
| Model numbers |
DVCX36FP30N, DVCX36FP30P |
| Framing (rough opening) |
42 3/8" W x 42 5/16" H x 21 1/2" D |
| Appliance dimensions |
42 1/4" W x 41 7/8" H x 22 1/16" D (face, without standoffs or nailing flanges) |
| Fireplace opening |
35 15/16" x 27 1/2" (W x H) |
| Glass |
Ceramic, frame opening 32 7/8" x 24" (W x H) |
| Fuel |
Natural gas (N) or propane (P) |
| Input, maximum |
37,000 Btu/hr natural gas; 34,000 Btu/hr propane |
| Input, minimum |
26,000 Btu/hr natural gas; 27,000 Btu/hr propane |
| Venting |
Direct vent, 5" x 8", top |
| Control |
Millivolt standing pilot with on/off switch |
| Blower and light |
Optional (FBB10 blower, LK6 lighting kit) |
| Log set |
Included |
| Barrier screen |
Included |
| Gas connection |
1/2" NPT |
| Installation type |
Zero clearance |
| Listing |
ANSI Z21.88/CSA 2.33 |
| High altitude |
Above 2,000 ft in the US the input may need to be reduced with a smaller orifice; see the manual |
| Manufactured (mobile) home |
May be installed in an aftermarket, permanently located manufactured home (USA only) where local codes allow |
| Shipping weight |
161 lb |
| Style |
Traditional, clean-face |
Installation Requirements
-
Clearances to combustibles: back standoffs 0", side standoffs 0", floor 0", top standoffs 0".
-
Ceiling: at least 84" from the bottom of the fireplace to the ceiling.
-
Side wall: at least 6" from the side of the fireplace to an adjacent side wall.
-
Mantel: follow the mantel chart in the installation manual for any combustible mantel above the unit.
-
Framing: frame with a 2 x 4 header across the top; see the manual for finishing the face with non-combustible material.
-
Venting: 5" x 8" direct vent from the top. The longest horizontal run is 20 ft, with at least 8 ft of vertical rise; island and room-divider installs follow the same limit. Keep 1" beside and below horizontal pipe and 3" above it, using the SD58DVAWTEC wall thimble. Check the vent graph in the manual for your layout.
-
Power: the burner needs no electricity; the optional blower and lighting kit need a 120V supply.
-
Installation: must be installed by a qualified installer per the installation manual and local codes.
Make It Yours: Fronts and Liners
The fronts fit over the included barrier screen: forged iron doors and frame in distressed pewter, or a 1 1/2" beveled rectangle frame in oil-rubbed bronze or brushed nickel.
Inside, rustic brick gives a warm masonry backdrop, old world stone comes with its own floor, and black porcelain keeps the firebox dark. Platinum embers (PE20) or the ember kit (EK1) can be added to the burner bed.
Bring the Tahoe Clean-Face Luxury 36" Home with Dreamwood Living
The Luxury 36" suits a room where the fireplace should look built in and put out the most heat the clean-face line offers at this size.
Reach out to our team and we will help you choose the front, liner and vent kit.
FAQs
Which Tahoe is right for me?
The Luxury 36" is the top clean-face trim, with ceramic glass, an included log set and up to 37,000 Btu/hr on natural gas. The Tahoe Clean-Face line comes in four trims. Contemporary (32", 36" and 42") burns over a rock set and crushed glass with a black porcelain liner included. Deluxe (32", 36" and 42") includes a six-piece ceramic fiber log set on a contour burner and vents from the top or the rear. Premium (32", 36" and 42") takes a hand-painted ceramic fiber log set, ordered separately, and offers aged brick, rustic brick or black porcelain liners. Luxury (36" and 42") has ceramic glass, an included log set, up to 40,000 Btu/hr and a multi-function model with the blower and light built in. There are also 36" see-through and peninsula models, and the traditional louvered Tahoe. Our Tahoe Deluxe vs. Premium vs. Luxury guide goes into more detail.
What do I need to order with it?
Nothing is required; the log set and barrier screen are included. Fronts (DDF36CPD, DF362XBZT or DF362NB) and liners (DVP36XRB, DVP36XWS or DVP36XKR) are optional.
Does it work during a power outage?
Yes. The millivolt standing pilot runs the burner without house power. The optional blower and lighting kit need a 120V supply.
How big is the framing?
42 3/8" wide, 42 5/16" high and 21 1/2" deep.
Documents & Downloads
Warranty
Empire limited parts warranty for Tahoe Clean-Face Luxury fireplaces, from the warranty section of the installation manual:
- Combustion chamber, heat exchanger and factory-installed glass: limited lifetime
- All other components, except remote controls, thermostats, accessories and replacement parts: 3 years
- Remote controls, thermostats, accessories and parts: 1 year
The warranty covers parts for the original purchaser. Full terms, including what is not covered, are in the warranty section of the installation manual.
/