Empire 5" x 8" Direct Vent Pro Wall Thimble with 2" Offset

Empire 5" x 8" Direct Vent Pro Wall Thimble with 2" Offset

The Empire SD58DVAWTEC is the DuraVent DirectVent Pro wall thimble with a 2" offset for 5" x 8" direct-vent pipe. The Rushmore manual uses it to keep the required 3" of clearance to combustibles above the vent where it passes through the wall, and Empire includes it in the DVVK5RP rear vent and DVVK5TP top vent kits.

Fits

Empire direct-vent fireplaces on our site that vent with 5" x 8" pipe. Check the venting section of your appliance's manual before ordering.

• Empire Boulevard: 60", 72"
• Empire Boulevard See-Through: 48"
• Empire Rushmore Clean Face: 36", 40", 50"
• Empire Rushmore See-Through: 40"
• Empire Tahoe Clean Face Luxury: 36", IP Control, 36", Millivolt, 36", Multi-Function, 42", IP Control, 42", Millivolt, 42", Multi-Function
• Empire Tahoe Clean Face Peninsula: 36"
• Empire Tahoe Clean Face See-Through: 36"
• Empire Tahoe Luxury: 42"
• Empire Tahoe Premium: 42", 48"

Related Parts

• Square horizontal cap (58DVA-HC)
• 6" pipe (58DVA-06)

Specifications

Installation Notes

• Clearance: the thimble holds 3" of clearance above the vent and 1" at the sides and bottom (Rushmore manual).
• Cap location: per the Rushmore manual, the bottom of the cap must be at least 12" above the ground, the top at least 18" below a combustible projection, and the cap at least 9" from a wall running parallel to it. The cap must not be recessed into the wall or siding.
• Vent limits: allowed lengths, elbows and termination clearances differ from one appliance to the next. Follow the venting section of your appliance's manual and the vent systems it approves.

Downloads

• Installation Instructions, Rushmore DVCT36/40CBP95 (41416)