Empire 5" x 8" Direct Vent Pro Vinyl Siding Standoff

Empire 5" x 8" Direct Vent Pro Vinyl Siding Standoff

The Empire 58DVA-VSS (Empire price list SD58DVAVSS) is the DuraVent DirectVent Pro vinyl siding standoff for 5" x 8" horizontal terminations. It mounts between the cap and the outside wall so the cap stands off the siding.

Fits

Empire direct-vent fireplaces on our site that vent with 5" x 8" pipe. Check the venting section of your appliance's manual before ordering.

• Empire Boulevard: 60", 72"
• Empire Boulevard See-Through: 48"
• Empire Rushmore Clean Face: 36", 40", 50"
• Empire Rushmore See-Through: 40"
• Empire Tahoe Clean Face Luxury: 36", IP Control, 36", Millivolt, 36", Multi-Function, 42", IP Control, 42", Millivolt, 42", Multi-Function
• Empire Tahoe Clean Face Peninsula: 36"
• Empire Tahoe Clean Face See-Through: 36"
• Empire Tahoe Luxury: 42"
• Empire Tahoe Premium: 42", 48"

Related Parts

• Square horizontal cap (58DVA-HC)

Specifications

Installation Notes

• Vinyl siding: Empire's manuals call for a vinyl siding standoff when the wall is finished with vinyl siding or another material that could discolor or warp. It goes between the cap and the wall, and the cap bolts to its flat face, leaving an air space.
• Cap location: per the Rushmore manual, the bottom of the cap must be at least 12" above the ground, the top at least 18" below a combustible projection, and the cap at least 9" from a wall running parallel to it. The cap must not be recessed into the wall or siding.
• Vent limits: allowed lengths, elbows and termination clearances differ from one appliance to the next. Follow the venting section of your appliance's manual and the vent systems it approves.

Downloads

• Installation Instructions and Owner's Manual, Tahoe Deluxe DVD32/36/42/48FP (43115)
• Installation Instructions, Rushmore DVCT36/40CBP95 (41416)