Empire 5" x 8" Direct Vent Pro Storm Collar

Empire 5" x 8" Direct Vent Pro Storm Collar

The Empire 58DVA-SC (Empire price list SD58DVASC) is the DuraVent DirectVent Pro storm collar for 5" x 8" vertical direct-vent pipe. It fits around the pipe above the roof flashing to make a water-tight seal, and Empire includes it in the DVVK5VP vertical vent kit.

Fits

Empire direct-vent fireplaces on our site that vent with 5" x 8" pipe. Check the venting section of your appliance's manual before ordering.

• Empire Boulevard: 60", 72"
• Empire Boulevard See-Through: 48"
• Empire Rushmore Clean Face: 36", 40", 50"
• Empire Rushmore See-Through: 40"
• Empire Tahoe Clean Face Luxury: 36", IP Control, 36", Millivolt, 36", Multi-Function, 42", IP Control, 42", Millivolt, 42", Multi-Function
• Empire Tahoe Clean Face Peninsula: 36"
• Empire Tahoe Clean Face See-Through: 36"
• Empire Tahoe Luxury: 42"
• Empire Tahoe Premium: 42", 48"

Related Parts

• Roof flashing (58DVA-F6)
• DVVK5VP vertical vent kit (DVVK5VP)

Specifications

Installation Notes

• Roof opening: the roof hole depends on the pitch; keep 1" between the vertical pipe and all combustible material. Frame the hole with lumber the size of the rafters. The flashing must be anchored to the frame to stand up to high winds, and the storm collar goes over the joint, sealed with non-hardening sealant.
• Height above the roof: the manuals set the minimum height from the roof to the lowest opening of the cap by roof pitch: 12" up to 6/12, 15" to 7/12, 18" to 8/12, 24" to 16/12 and 36" to 21/12. Raise it in high wind, near trees or next to taller roof lines if draft is poor.
• Vent limits: allowed lengths, elbows and termination clearances differ from one appliance to the next. Follow the venting section of your appliance's manual and the vent systems it approves.

Downloads

• Installation Instructions, Rushmore DVCT36/40CBP95 (41416)