Empire Tahoe Clean Face Premium 36" Direct Vent Gas Fireplace - IP Control

Empire Tahoe Clean Face Premium 36" Direct Vent Gas Fireplace - IP Control 

Ceramic Fiber Liner options for Empire Tahoe Clean Face Premium 36" Direct Vent Gas Fireplace - IP Control  include a traditional Aged Brick with smoky highlights, and an old-world Rustic Brick. Or choose the deep black polished porcelain-steel liner that reflects the flames for a luxurious effect.

The available lighting kit draws attention to the intricate details in the log set and brick liner – even when no fire is burning. You can enhance heat distribution with the optional variable-speed blower. Both the light and blower include dimmer controls.

Clean-Face Premium models are available in Millivolt and Intermittent Pilot.

Features

• Tempered Glass: 25 x 31
• Venting: 4 x 6 5/8 Top Vent Only
• Framing: 47 1/4 H x 38 W x 17 5/8 D  
• Available Liners
• Includes:
• Fireplace Barrier Screen
• Requires:
• Log Set
• Optional Remotes
• Weight: 100 lbs.

*Note: Must Choose Log Set to Complete This Unit. Accepts 6-piece Ceramic Fiber Log Set. (Not Included).

*Note: Shows surround and mantel (not included)

What to Order With It

Required (choose one log set):

• Log Set, 6-pc., 32- 36-in., Ceramic Fiber (LS3236FF)

Required (venting, order separately):

• 4 x 6 5/8 Top Vent Only. See the installation manual for vent kits and limits.

Optional – Remotes and wall controls:

• Remote, Battery Receiver/Remote, On/Off (FRBC)
• Remote, Battery Receiver/Remote, Thermostat (FRBTC2)
• Remote, Electric Receiver/Battery Remote, On/Off (FREC)
• Remote, Battery Receiver/Remote, TouchScreen, Programmable (FRBTPS)
• Wall Switch, On/Off (FWS1)
• Wall Thermostat, Reed Switch (TMV)
• Wall Thermostat, Wireless (TRW)

Optional – Variable remote kit (IP models):

• Remote, Var Flame Kit, NG (RVKN)
• Remote, Var Flame Kit, LP (RVKP)

Optional – Accessories:

• Blower, Auto, Variable-Speed (FBB10)
• Flex Gas Line, 24-in. Stainless Steel (GF24)
• Platinum Embers (PE20)
• Ember Kit (EK1)
• Lighting Kit, 120 V, Incl Rheostat (LK6)

Optional – Liners:

• Liner, Aged Brick (DVP36FAB)
• Liner, Rustic Brick (DVP36FRB)
• Liner, Black Porcelain (Replaces DVP36LKR) (DVP36NKR)

Optional – Gas conversion kits:

• Conversion Kit, IPI (LP To NG) (32877)
• Conversion Kit, IPI (NG To LP) (32876)

Installation Requirements

• Clearances to combustibles: Back 0", sides 0", floor 0"; 6" to an adjacent side wall; 72" from the bottom edge of the fireplace to the ceiling; 9" non-combustible board above the fireplace opening
• Mantel clearance: Follow the mantel chart in the installation manual for any combustible mantel above the unit.
• Venting: 4" x 6-5/8" direct vent, top vent; maximum 40 ft vertical and 20 ft horizontal (see the venting graph in the manual for allowed combinations)
• Gas input (BTU/hr): Natural gas 24,000 max; propane 24,000 max
• Power: Intermittent pilot models ship with 4 AA batteries and an AC adapter.
• Installation: Must be installed by a qualified installer per the installation manual and local codes.

Downloads

• Installation & Owner's Manual (DVCP32/36/42BP30/70)
• Download Brochures
• Download Home Owner’s Manual
• Tahoe Clean-Face Traditional Fireplace Log Set
• Tahoe Clean-Face Traditional Fireplace Liner Kit
• Tahoe Clean-Face Traditional Burner Upgrade Kit
• Download Architecture