The Bromic Tungsten Smart-Heat Electric Coastal 4000W is an outdoor electric radiant heater from the updated Tungsten Electric collection, built with marine-grade construction for coastal sites where salt air and moisture are a concern.
Key Features
- Marine-grade construction with added resistance to salt air and corrosion, for oceanfront, rooftop and poolside sites
- 4000W output from two heating elements
- Soft-glow infrared elements and a spectral reflector for targeted radiant heat with reduced glare
- Slim, low-profile housing with a single-post mount, angle adjustable to aim the heat
- Wall, ceiling or flush recessed mounting; recessing uses the low clearance recess kit (sold separately)
- High-temperature, corrosion-resistant coating with an IPX5 water rating for outdoor use
- Finishes: black or white
What to Order With It
Specifications
| Model numbers |
Black: BH0450412 (240V), BH0450422 (208V); White: BH0450413 (240V), BH0450423 (208V) |
| Output |
4000W |
| Elements |
2 |
| Heat area |
Up to 130 ft² |
| Electrical |
240V, 16.6A; 208V, 19.2A |
| Dimensions |
45" W x 7" H x 6" D |
| Weight |
13 lbs |
| Included mounting bracket |
9" |
| Minimum floor clearance |
Wall 72"; ceiling 96" |
| Water rating |
IPX5 |
| Certification |
Intertek ETL / cETL, 4005951 |
A licensed electrician must install the heater following the installation manual and local codes. Do not mount it vertically; that voids the warranty. Check the manual for all clearances.
Downloads
Warranty
Bromic Heating warranty for the original owner: two years on Tungsten Electric heaters, with seven years on the heating elements. Under the warranty Bromic supplies a replacement heater or part; labor, removal, reinstallation and shipping are the owner's cost. Read the full terms on the Bromic Heating warranty page.
