The Bromic Tungsten Coastal low clearance ceiling recess kit sets a Tungsten Smart-Heat Electric Coastal heater flush into the ceiling, in a shallower cavity than a standard recess. It has a built-in cooling fan, and comes in two sizes and in black or white.
Key Features
- Flush ceiling mount for Tungsten Electric Coastal heaters
- Minimum cavity depth 7.5"
- Built-in cooling fan that needs its own power supply (under 1A)
- Powder-coated stainless steel 316
- Marine grade, IPX5; for land-based and coastal sites only, not for boats
Specifications
| Model numbers |
2000W/4000W: BH3450862 (black), BH3450863 (white); 3000W/6000W: BH3450872 (black), BH3450873 (white) |
| Overall dimensions |
2000W/4000W: 57.1" L x 11.1" W x 7.5" H; 3000W/6000W: 68.7" L x 11.1" W x 7.5" H |
| Ceiling cutout |
2000W/4000W: 49.5" x 10"; 3000W/6000W: 61" x 10" |
| Minimum cavity depth |
7.5" |
| Ceiling thickness |
0.39" to 1.2" (contact Bromic for thicker ceilings) |
| Minimum wall clearance from cutout |
19.7" |
| Weight with heater |
2000W/4000W: 42 lbs; 3000W/6000W: 49 lbs |
| Fan power |
208V, 220-240V or 277V, under 1A |
| Finish |
Powder-coated stainless steel 316 |
Install with the heater surface at least 94" above the finished floor. The heater must be fully protected from water coming from above, and must never be covered with insulation. Joists, beams and rafters must not be cut to fit the kit. A licensed electrician must install it; installation takes two people.
Downloads
Warranty
Bromic Heating warranty for the original owner: two years on Tungsten Electric heaters, with seven years on the heating elements. Under the warranty Bromic supplies a replacement heater or part; labor, removal, reinstallation and shipping are the owner's cost. Read the full terms on the Bromic Heating warranty page.
