Empire 12" Diameter Tall Cone Flashing for Wood Firebox

Empire 12" Diameter Tall Cone Flashing for Wood Firebox

The Empire tall cone roof flashing (model number WB12VFTC) is part of Empire's 12 inch air-cooled chimney system for the Blackburn 54 wood burning firebox (WB5412FB0F) and the Aspen 60" Traditional outdoor wood firebox (OWB60FB0F).

Fits These Wood Fireboxes

• Empire Blackburn 54" Wood Burning Firebox (WB5412FB0F)
• Empire Aspen 60" Traditional Outdoor Wood Firebox (OWB60FB0F)

Other Chimney Size

• 14" Diameter Tall Cone Flashing for Wood Firebox (for the earlier 14 inch Blackburn 54)

Specifications

Installation Notes

• Installation: slip the flashing over the chimney, nail it to the roof and caulk the flashing-to-roof joint, the vertical seam and all nail heads with roofing sealant. Shingles go under the flashing plate on the lower side of the roof and over it on the upper side.
• Above the roof: caulk the overlap seams of any pipe above the roof line, and add a storm collar above the flashing.
• Clearance: keep a 2 inch air space between the chimney and insulation or other combustible materials along its whole run.

Downloads

• Installation Manual, Blackburn 54 Wood Firebox WB5412FB0F (46688)
• Installation Manual, Aspen 60 Outdoor Wood Firebox OWB60FB0F (45939)

Warranty

Empire's wood firebox manuals give venting parts a limited 10-year parts warranty against defects in workmanship or material, for the original purchaser. Travel, diagnostic, freight, removal and reinstallation costs are not covered. Full terms are in the warranty section of the installation manual.