Superior DRL4048 See Through Gas Fireplace
Black Friday Sale
Contact us for this item's sale price. Our team quotes it by phone, text or chat.
Ends Nov 27 · Some exclusions apply
Black Friday Sale
Contact us for this item's sale price. Our team quotes it by phone, text or chat.
Ends Nov 27 · Some exclusions apply
The Superior DRL4048 See Through is a 48" linear gas fireplace you can watch from two rooms. It pairs the DRL4048TEN fireplace with Superior's see-through conversion kit, so a long, low fire over reflective black crushed glass shows on both sides of the wall.
Choose the indoor see-through kit to share the fire between two rooms, or the indoor/outdoor kit to put the second face outdoors, on a patio or porch. Both arrive with the fireplace, ready for your installer to convert.
Each side has a ceramic glass viewing area 46" W x 14-1/2" H, with a protective screen barrier. On natural gas it runs from 35,000 down to 23,500 Btu/hr, and the electronic IPI/CPI ignition has a four AA battery backup, so the burner still lights in a power outage.
A see-through fireplace works well in a wall between a living room and a dining room, a kitchen and a family room, or a primary bedroom and its sitting area. Browse our other see-through and multi-sided fireplaces, or see every size in the Superior DRL linear gas fireplaces lineup.
Superior ships the DRL4048TEN as a one-sided fireplace, and the see-through kit (STK-DVLIN48 or OSTK-LIN48) converts it on site. Frame for the see-through depth from the start: the opening is 55-5/8" W x 39-1/8" H x 18-1/2" D, 1" shallower than a one-sided install. It vents through the top with 4-1/2" x 7-1/2" Superior Secure Vent or Secure Flex. The HeatFlo kit works with the see-through setup if a TV or artwork is going on the wall above.
Want only one face? The Superior DRL4048 48" Linear Contemporary Direct Vent Gas Fireplace is the same fireplace without the kit.
Fireplace (DRL4048TEN):
See-through kit, the one you choose:
Required: Control (choose one)
A wall switch or thermostat works too, using the wire that ships with the fireplace.
Required: Venting (4-1/2" x 7-1/2", ordered separately)
Optional: HeatFlo and trim
Optional: Media and logs
Optional: Gas conversion and touch-up
Superior's glass liner kits and add-on blower kits don't work with a see-through setup, so they aren't offered here.
| Model | DRL4048TEN fireplace with STK-DVLIN48 or OSTK-LIN48 see-through kit (natural gas; propane with conversion kit) |
| Superior item numbers | F4846 (fireplace), F4853 / F4869 (see-through kit) |
| Type | Linear direct vent gas fireplace, see-through (indoor/indoor or indoor/outdoor), sealed combustion |
| Input, natural gas | 35,000 Btu/hr high, 23,500 Btu/hr low |
| Input, propane (conversion kit) | 31,000 Btu/hr high, 25,500 Btu/hr low |
| Efficiency, natural gas | 63% AFUE, 62.5% P4 |
| Efficiency, propane | 63% AFUE, 62.4% P4 |
| Glass viewing area | 46" W x 14-1/2" H, each side |
| Fireplace size | 54-1/4" W x 39" H x 20" D |
| See-through framed opening | 55-5/8" W x 39-1/8" H x 18-1/2" D |
| Minimum base to ceiling | 84" |
| Ignition | Electronic IPI/CPI with four AA battery backup |
| Power | 120 VAC, 60 Hz, unswitched, grounded, to the junction box on the left side |
| Gas inlet pressure | Natural gas 5" to 10.5" WC; propane 11" to 13" WC |
| Venting | Direct vent, top, 4-1/2" x 7-1/2" Superior Secure Vent or Secure Flex |
| Vent run | Up to 40 ft vertical, starting with at least 2 ft of vertical vent off the fireplace; horizontal run per the vent chart in the manual |
| Media and interior | Reflective black crushed glass (two 5 lb bags); black painted interior |
| Altitude | 0 to 4,500 ft with the standard orifices |
| Listing | ANSI Z21.88 / CSA 2.33 and CSA 2.17, vented gas fireplace heater (PFS report F22-797) |
| Approved locations | Bedrooms; aftermarket mobile homes and permanently located manufactured homes (USA only) |
| Shipping weight | Fireplace 283 lb; see-through kit 78 lb (STK-DVLIN48) or 158 lb (OSTK-LIN48) |
| Warranty | 20 year limited (see Warranty below) |
Efficiency figures are from Superior's see-through smart sheet; the propane figures are with the conversion kit installed. Clearances, mantel heights and the full framing drawings are in the installation manual.
The front face has integrated tile stops, and the indoor see-through kit adds tile stops for the second face, so tile, stone or another non-combustible facing can run right up to the glass. Add the black linear trim kit for a framed look, and change the media with reflective blue or platinum glass, river rock or the driftwood log set. Compare it with the other linear gas fireplaces we carry.
The DRL4048 See Through suits a new build or a remodel where one fire should anchor two spaces. Reach out to our team for help planning the framing, the vent run or the finish on each side.
How does it ship?
As two boxes: the DRL4048TEN fireplace, which leaves the factory as a one-sided unit, and the see-through kit. Your installer converts it on site following the instructions that come with the kit.
Can I add a blower or a glass liner?
No. Superior's add-on blower kit and its reflective glass liner kits aren't compatible with the see-through kit. The HeatFlo kit, the trim kit and the media and log options all work with it.
What's the difference between the two kits?
The indoor see-through kit (STK-DVLIN48) puts a second glass face in another room. The indoor/outdoor kit (OSTK-LIN48) makes the second face an outdoor one, with its own outer bezel and exterior glass door.
Is it available for propane?
It ships for natural gas. Superior's GCK-M-4048NP conversion kit changes it to propane, at 31,000 Btu/hr high and 25,500 Btu/hr low.
How do I frame for it?
The see-through framed opening is 55-5/8" W x 39-1/8" H x 18-1/2" D, and you need at least 84" from the base of the fireplace to the ceiling. Both faces get non-combustible fireboard, which ships with the fireplace and the kit.
Can I put a TV above it?
Superior suggests at least 12" from the fireplace opening to the TV on a flush wall, or 18" with a recessed wall pocket, and the TV must stay within its maker's temperature rating. The HeatFlo kit sends warm air out a register near the ceiling instead of up the wall. Our guide to fireplace heat management explains how these kits work.
Superior's 20 Year Limited Warranty covers the DRL4048 against defects in materials and workmanship:
Vent components, trim and paint are not covered. The warranty is for the original owner of a fireplace installed in the US. Full terms are in the warranty certificate.