The Sierra Flame Toscana 58" is a three-sided peninsula (bay front) direct vent gas fireplace, open to view from the front and both ends. Like the Vienna, it uses a fan-driven double glass channel, so there are no louvers, screens or heat gaps, and it frames in wood with no concrete board required. A media kit comes with it. The Toscana also comes in 38" and 48" widths.
Key Features
- Double glass front with fans moving room air through the glass channel, so there is no mesh safety screen; the fans must run whenever the fireplace is on
- Three-sided bay front: front glass plus two end panels
- 4 variable speed fans (110 V)
- Electronic pilot ignition with a hand-held remote
- All-wood framing, no concrete board required; combustible finishes allowed
- Media kit included
- Ships natural gas; propane by conversion kit
What to Order With It
Specifications
| Model |
TOSCANA-58-NG |
| Type |
Three-sided peninsula, direct vent |
| Input, natural gas |
40,000 / 23,000 Btu/hr (high / low) |
| Input, propane (with kit) |
36,000 / 22,000 Btu/hr (high / low) |
| Venting |
5" x 8" top vent |
| Framing (W x H x D) |
61 1/4" W x 36 1/2" H x 19 1/2" D |
| Front glass viewing area |
15.28" H x 59.21" W |
| End glass viewing area |
13.40" W each side |
| Fans |
4, variable speed, 110 V / 60 Hz |
Installation must be done by a licensed gas fitter or qualified technician, following the installation manual and local codes. Check the manual for clearances, venting runs and framing details before you build.
Downloads
Warranty
Sierra Flame gas fireplace limited warranty: five years against defects in materials and workmanship on the combustion chamber, heat exchanger and burners (and stainless steel parts against tarnishing); one year on electrical and wear parts such as blowers, gas valves, switches, wiring, remote controls, igniters, gaskets, glass (thermal damage only) and pilot assemblies. It covers the original purchaser from an authorized Sierra Flame dealer and requires installation by a licensed technician to the manual and local codes. Labor, venting components, and damage from water, weather or chemical cleaners are not covered. Read the full terms in the Sierra Flame Gas Fireplace Warranty (2024).
