Invicta Kazan GA 26" Cast Iron Wood Burning Stove
Free Shipping over $299
Free Shipping over $299
The Invicta Kazan GA is the Kazan with a "grand angle" door: a wide, screen-printed glass pane that covers the front and shows more of the fire. The finned, radiator-style cast iron body is the same. Model number 6104-43.
Built by Invicta in Donchery, France, the Kazan GA is 25-1/2" wide and 14-3/4" deep, EPA certified at 1.76 g/hr and rated to heat up to 1,500 sq ft.
The screen-printed GA glass gives the Kazan a sleek black front and a larger view of the flames. Behind it, the cast iron fins extend the heat transfer surface, and the stove puts out up to 42,000 Btu/hr with burns of 4+ hours on a full load.
The compact size fits a den, a cabin or a smaller living room, and the glass front keeps it looking modern. See our other wood stoves if you need a larger firebox.
The Kazan GA has a 6" flue that leaves from the top or the back, for a straight run up or a connection through the wall behind it. With a single-wall connector it needs 16" behind, 20" at the sides and 15" in a corner. With a double-wall connector and Invicta's optional rear heat shield (model number ED-HSB-KAZAN), the rear clearance drops to 6". Invicta also offers a rear flue adaptor (model number F610271B). The stove sits on non-combustible floor protection at least 41-1/4" x 36-1/4".
Required for installation (not included):
Optional:
| Model number | 6104-43 |
|---|---|
| Fuel | Cordwood, logs up to 22" long |
| Maximum heat output | 42,000 Btu/hr |
| Emissions | 1.76 g/hr (EPA 2020 standard) |
| Efficiency | 62.5% weighted average (HHV) |
| Heating capacity | Up to 1,500 sq ft |
| Firebox volume | 1.53 cu ft |
| Burn time | Up to 4+ hours |
| Flue | 6" diameter, top or rear exit |
| Chimney | Listed Type HT (UL 103HT) chimney, or a code-approved masonry chimney with a 6" round or 8" x 8" liner; 15 ft to 45 ft high; draft 0.06" to 0.10" WC |
| Dimensions (H x W x D) | 31-1/2" x 25-1/2" x 14-3/4" |
| Weight | 357 lb |
| Color | Anthracite |
| Door glass | Screen-printed grand angle (wide-view) glass |
| Clearances, single-wall connector | Back 16", sides 20", corner 15" |
| Clearances, double-wall connector with rear heat shield | Back 6", sides 22", corner 15" |
| Floor protection | Non-combustible, at least 41-1/4" x 36-1/4"; no insulated hearth pad required |
| Outside air | Optional connection for a 3" duct (supplied by others) |
| Listing | EPA certified to the 2020 standard; UL 1482 |
| Mobile home | Not approved |
| Made in | France |
The Kazan GA suits a smaller room where you want a modern glass front and a bigger view of the fire. Reach out to our team with your room size and chimney details, and we will help you plan the installation.
What is the difference between the Kazan and the Kazan GA?
The body, firebox and ratings are the same. The Kazan GA has a wide, screen-printed "grand angle" glass door that shows more of the fire; the Kazan has a framed glass door. The Kiara uses the same firebox in a body with a flat front and paneled sides. The GA weighs 357 lb against 346 lb for the Kazan.
How large a space can the Kazan GA heat?
Invicta rates the Kazan GA to heat up to 1,500 sq ft, with a maximum output of 42,000 Btu/hr. Insulation, layout and climate all change the real figure.
Can the flue come out of the back?
Yes. The 6" flue can exit from the top or the rear. For a rear connection, Invicta offers a rear flue adaptor (model number F610271B).
How close can it go to a wall?
With a single-wall connector: 16" at the back, 20" at the sides and 15" in a corner. With a double-wall connector and the optional rear heat shield, the back clearance is 6".
Can it go in a mobile home?
No. Invicta does not approve this stove for mobile home installation.
Invicta limited warranty:
Invicta's owner's manual adds that signs of over-firing void the warranty, so burn only dry cordwood at the loads it describes.