Invicta Kazan 26" Cast Iron Wood Burning Stove
Free Shipping over $299
Free Shipping over $299
The Invicta Kazan takes its look from the cast iron radiator. Deep fins run around the body of the stove, giving it a distinctive ribbed profile and extra surface to pass heat into the room. Model number 6104-44.
Built by Invicta in Donchery, France, the Kazan is a compact stove, 25-1/2" wide and 14-3/4" deep, that is EPA certified at 1.76 g/hr and rated to heat up to 1,500 sq ft.
The fins are more than a style choice: Invicta designed them to extend the heat transfer surface, so more of the fire's output reaches the room. The Kazan puts out up to 42,000 Btu/hr and burns for 4+ hours on a full load.
Its small footprint suits a den, a cabin, a sunroom or a smaller living room, and it stands on legs. Compare it with our other wood stoves if you need more output.
The Kazan has a 6" flue that leaves from the top or the back, for a straight run up or a connection through the wall behind it. With a single-wall connector it needs 16" behind, 20" at the sides and 15" in a corner. With a double-wall connector and Invicta's optional rear heat shield (model number ED-HSB-KAZAN), the rear clearance drops to 6". Invicta also offers a rear flue adaptor (model number F610271B). The stove sits on non-combustible floor protection at least 41-1/4" x 36-1/4".
Required for installation (not included):
Optional:
| Model number | 6104-44 |
|---|---|
| Fuel | Cordwood, logs up to 22" long |
| Maximum heat output | 42,000 Btu/hr |
| Emissions | 1.76 g/hr (EPA 2020 standard) |
| Efficiency | 62.5% weighted average (HHV) |
| Heating capacity | Up to 1,500 sq ft |
| Firebox volume | 1.53 cu ft |
| Burn time | Up to 4+ hours |
| Flue | 6" diameter, top or rear exit |
| Chimney | Listed Type HT (UL 103HT) chimney, or a code-approved masonry chimney with a 6" round or 8" x 8" liner; 15 ft to 45 ft high; draft 0.06" to 0.10" WC |
| Dimensions (H x W x D) | 31-1/2" x 25-1/2" x 14-3/4" |
| Weight | 346 lb |
| Color | Anthracite |
| Clearances, single-wall connector | Back 16", sides 20", corner 15" |
| Clearances, double-wall connector with rear heat shield | Back 6", sides 22", corner 15" |
| Floor protection | Non-combustible, at least 41-1/4" x 36-1/4"; no insulated hearth pad required |
| Outside air | Optional connection for a 3" duct (supplied by others) |
| Listing | EPA certified to the 2020 standard; UL 1482 |
| Mobile home | Not approved |
| Made in | France |
The Kazan suits a smaller room or a cabin where a compact stove with real character makes sense. Reach out to our team with your room size and chimney details, and we will help you plan the installation.
How is the Kazan different from the Kazan GA and the Kiara?
All three share the same firebox and ratings. The Kazan has a framed glass door and radiator-style fins, the Kazan GA adds a wide screen-printed glass door to the finned body, and the Kiara has a flat front and paneled sides. The Kazan weighs 346 lb; the other two weigh 357 lb.
How large a space can the Kazan heat?
Invicta rates the Kazan to heat up to 1,500 sq ft, with a maximum output of 42,000 Btu/hr. Insulation, layout and climate all change the real figure.
Can the flue come out of the back?
Yes. The 6" flue can exit from the top or the rear. For a rear connection, Invicta offers a rear flue adaptor (model number F610271B).
How close can it go to a wall?
With a single-wall connector: 16" at the back, 20" at the sides and 15" in a corner. With a double-wall connector and the optional rear heat shield, the back clearance is 6".
Can it go in a mobile home?
No. Invicta does not approve this stove for mobile home installation.
Invicta limited warranty:
Invicta's owner's manual adds that signs of over-firing void the warranty, so burn only dry cordwood at the loads it describes.