Empire Stove 29" Archway 2300 Wood Burning Insert with Blower
The Empire Stove Archway 2300 is an EPA-certified, non-catalytic wood burning fireplace insert for an existing masonry fireplace, rated by Empire to heat 500 to 2,100 sq ft with up to 75,000 Btu/h on dry cordwood.
Model number WB23IN has a 2.4 cu ft firebox for logs up to 20" long, a blower included and up to 8 hours of burn time. Order one door overlay and one surround to complete it, plus a continuous 6" stainless steel chimney liner.
The Archway 2300: An EPA Wood Insert for Masonry Fireplaces
One lever sets the burn rate, and the single cast iron door has air wash ceramic glass. The rated heat output range is 14,200 to 44,500 Btu/h, with 72% average efficiency (HHV) and an average of 2.3 g/h of particulate emissions.
The included blower moves up to 144 CFM, variable speed, with a thermodisc. The insert fits a code-compliant masonry fireplace with an opening at least 24" high, 29 1/2" wide and 19" deep, and vents through a continuous 6" stainless steel liner listed to UL 1777 that runs to the top of the chimney. It is not approved for mobile homes.
See every model in our wood fireplace inserts collection, or browse all fireplace inserts.
Deciding between a new fireplace and an insert? Our guide to fireplace vs. fireplace insert explains the difference. Comparing wood heat options? Our guide to types of wood burning fireplaces covers open, EPA-certified, insert and outdoor designs.
Features
-
EPA certified: 2.3 g/h average particulate emissions and 72% average efficiency (HHV).
-
Heat: up to 75,000 Btu/h on dry cordwood, rated by Empire for 500 to 2,100 sq ft.
-
Firebox: 2.4 cu ft (1.95 cu ft EPA loading volume), for logs up to 20" long loaded east-west (16" recommended).
-
Burn time: up to 8 hours.
-
Blower included: up to 144 CFM, variable speed, with a thermodisc.
-
Door: single door with ceramic glass and a cast iron frame; one-lever air control and air wash glass.
-
Masonry fit: needs an opening at least 24" high, 29 1/2" wide and 19" deep.
-
Surround choices: 29" x 44", 32" x 50" or a cuttable 32" x 50", all in black.
Package Contents
- Archway 2300 wood burning insert with a single cast iron door and ceramic glass
- Blower, up to 144 CFM, with thermodisc
One door overlay and one surround are required and ordered separately, and the 6" stainless steel chimney liner is separate (see below).
What to Order With It
Door overlay for the Archway 2300 (one required):
Surround for the Archway 2300 (one required):
Optional – Fresh air:
Specifications
| Model numbers |
WB23IN |
| Type |
Wood burning fireplace insert, non-catalytic, dry cordwood |
| Recommended heating area |
500 to 2,100 sq ft |
| Firebox volume |
2.4 cu ft overall; 1.95 cu ft EPA loading volume |
| Maximum burn time |
8 hours |
| Maximum heat output |
75,000 Btu/h (dry cordwood) |
| Heat output range |
14,200 to 44,500 Btu/h |
| Average efficiency |
72% (HHV), dry cordwood |
| Particulate emissions |
2.3 g/h average (EPA / CSA B415.1-10) |
| Log length |
20" maximum, east-west; 16" recommended |
| Flue outlet |
6" |
| Chimney |
Continuous 6" stainless steel liner listed to UL 1777 |
| Blower |
Included (up to 144 CFM), variable speed with thermodisc |
| Door |
Single door, ceramic glass, cast iron frame |
| Minimum masonry opening |
24" high x 29 1/2" wide x 19" deep |
| Mobile home |
Not approved |
| Safety listing |
UL 1482, UL 737 |
Installation Requirements
-
Where it can go: only in a code-compliant masonry fireplace with a lined masonry chimney built for solid fuel. Do not remove bricks or mortar from the fireplace. Not approved for mobile homes or bedrooms.
-
Masonry opening: at least 24" high, 29 1/2" wide and 19" deep (add about 4" of width if a fresh air kit is used).
-
Chimney liner: a continuous 6" stainless steel liner listed for solid fuel (UL 1777, Class 3) from the insert to the top of the chimney. The chimney must rise at least 3 ft above the roof where it passes through and 2 ft above anything within 10 ft. Do not connect to a flue serving another appliance.
-
Floor protection: non-combustible floor protection at least 16" in front of the door opening and 8" to the sides (US) when the hearth is at least 5" above the combustible floor; with a lower hearth it needs an R-value of at least 1.00 and must extend 23" in front. The depth of the existing hearth counts toward it.
-
Clearances: side walls, combustible surround, mantel and mantel shelf clearances are in the masonry opening and clearances table of the installation manual.
-
Fire screen: Empire states that in the United States, and anywhere a particulate emission limit is enforced, this EPA-certified appliance may not be operated with the door open and a fire screen in place. Burn with the door closed.
-
Installation: must be installed by a qualified installer per the installation manual and local codes; check with your local building official for permits and inspection.
Make It Yours: Door Overlay, Surround and Fresh Air
Pick a door overlay in black (WD2BL) or brushed nickel (WD2NB), then a black surround to cover the fireplace face: 29" x 44" (WS2344BL), 32" x 50" (WS2350BL) or 32" x 50" cuttable (WS2350TBL).
The optional 5" fresh air intake kit (WA5IN) brings outside air to the insert; allow about 4" of extra width in the masonry opening when you use it.
Bring the Archway 2300 Home with Dreamwood Living
The Archway 2300 suits a home with a masonry fireplace and 500 to 2,100 sq ft to heat with wood.
Reach out to our team and we will help you pick the door overlay and surround and plan the liner.
FAQs
Which Archway is right for me?
The Archway 2300 is the larger of the two, with a 2.4 cu ft firebox. We carry two Archway wood inserts, both EPA-certified and non-catalytic, each with a blower included, one-lever air control and air wash glass. The Archway 1700 has a 1.9 cu ft firebox for 500 to 1,800 sq ft and 18" logs, and needs a masonry opening at least 21 1/2" high, 27 1/2" wide and 12 7/8" deep. The Archway 2300 has a 2.4 cu ft firebox for 500 to 2,100 sq ft and 20" logs, and needs at least 24" high, 29 1/2" wide and 19" deep. Each needs a door overlay, a surround and a 6" stainless steel liner.
What do I need to order with it?
One door overlay and one surround, plus a continuous 6" stainless steel chimney liner listed to UL 1777. The blower comes with the insert, and the 5" fresh air intake kit is optional.
Will it fit my fireplace?
It fits a code-compliant masonry fireplace with a lined masonry chimney built for solid fuel and an opening at least 24" high, 29 1/2" wide and 19" deep (add about 4" of width with the fresh air kit). Do not remove bricks or mortar to make it fit.
Can it go in a prefab (factory-built) fireplace?
No. It goes only in a code-compliant masonry fireplace with a lined masonry chimney built for solid fuel.
How much area will it heat?
Empire rates it for 500 to 2,100 sq ft. Actual results depend on the layout, insulation and climate of the home, and on burning dry cordwood.
What floor protection does it need?
Non-combustible floor protection at least 16" in front of the door opening and 8" to the sides (US) when the hearth is at least 5" above the combustible floor. With a lower hearth it needs an R-value of at least 1.00 and must extend 23" in front. The depth of the existing hearth counts toward it.
Can it go in a mobile home or bedroom?
No. It is not approved for mobile homes or bedrooms.
Can I burn it with the door open?
No. In the United States, and anywhere a particulate emission limit is enforced, this EPA-certified appliance may not be operated with the door open and a fire screen in place. Burn with the door closed.
Documents & Downloads
Warranty
Empire limited lifetime warranty, from the warranty table in the installation manual (parts / labor):
- Combustion chamber (welds only) and cast iron door frame: lifetime / 5 years
- Ceramic glass, plating (manufacturing defect) and convector air-mate: lifetime parts
- Surrounds, heat shields, ash drawer, steel legs, pedestal, trims, C-Cast baffle, secondary air tubes, removable stainless steel combustion chamber, deflectors and supports: 7 years parts
- Handle assembly, glass retainers and air control mechanism: 5 years / 3 years
- Removable carbon steel combustion chamber components: 5 years parts
- Standard and optional blower, heat sensors, switches, rheostat, wiring and electronics: 2 years / 1 year
- Paint (peeling), gaskets, insulation, ceramic fiber blankets, firebricks and other options: 1 year parts
- Parts replaced under the warranty: 90 days
The warranty is for the original retail purchaser and covers normal residential use. Proof of purchase, the model name and the serial number are needed for a claim. Full terms, including what is not covered, are in the warranty section of the installation manual.
