Empire Rushmore 36"/40" Birch, Driftwood or Charred Log Sets

Empire Rushmore 36"/40" Birch, Driftwood or Charred Log Sets

These Empire log sets fit the Rushmore 36" and 40" clean-face direct-vent fireplaces (DVCT36 and DVCT40): Burncrete birch (LS36CBB, LS40CBB), ceramic fiber driftwood (LS36DINF, LS40DINF) or ceramic fiber traditional charred (LS36TINF, LS40TINF). Each fireplace needs one log set of its size.

Key Features

• Log sets for Rushmore 36" and 40" fireplaces
• Birch (Burncrete), driftwood or traditional charred (ceramic fiber)
• One log set required per fireplace

What to Order With It

This listing is the log set only.

Required for these fireplaces (one log set per fireplace):

• Rushmore 36" Clean-Face Direct Vent Gas Fireplace (DVCT36CBP95N)
• Rushmore 40" Clean-Face Direct Vent Gas Fireplace (DVCT40CBP95N)

Specifications

Installation Requirements

• Log placement: each log goes in the position shown in the log set manual, on its locating pins where the manual shows them. Do not move logs or add pieces.
• Embers: pull the ember material apart into small, dime-size pieces and spread it one layer thick where the manual shows.
• Installation: must be installed by a qualified installer per the log set and fireplace manuals and local codes. In Massachusetts the installation must be done by a licensed plumber or gas fitter.

Downloads

• Log Set Manual, LS36CBB/LS40CBB (41605)
• Log Set Manual, LS36DINF/LS40DINF (38810)
• Log Set Manual, LS36TINF/LS40TINF (38799)

Warranty

The log set manual does not list separate warranty terms. See the fireplace manual for the appliance warranty, and make claims through the dealer where you bought it.