Skip to content
Free Shipping over $299 | Contact Us for Deals
Free Shipping over $299 | Contact Us for Deals

Empire 24" Ponderosa Refractory Log Set

SKU LS24P
Original price $374.00 - Original price $374.00
Original price
$374.00
$374.00 - $374.00
Current price $374.00

Free Shipping over $299


Please contact us directly to request quote for Empire products. 

  • FREE SHIPPING : All Over United States over $299

  • SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com

Empire 24" Ponderosa Refractory Log Set

The Empire 24" Ponderosa log set (model number LS24P) is a set of refractory gas logs for Empire's 24" slope glaze burners: the vent-free VFSR, VFSV, VFSE and VFSM, or the vented VSR. This listing is the logs only; a 24" slope glaze burner is required and ordered separately.

Empire log sets for slope glaze burners comply with ANSI Z21.11.2 for unvented heaters and ANSI Z21.60 for vented decorative appliances, so the set can run vent-free or vented, depending on the burner you choose and your local codes.

Key Features

  • Refractory gas logs
  • Made for Empire 24" slope glaze burners (VFSR, VFSV, VFSE, VFSM and the vented VSR)
  • Logs only; burner ordered separately
  • Vent-free or vented use, depending on the burner and local codes
  • Logs pin onto the burner in set positions

What to Order With It

This listing is the log set only. The slope glaze burners come with the rock wool embers and lava rock.

Required – Burner (choose one 24" Empire slope glaze burner):

Optional – Embers, grate, riser and hood:

Specifications

Model numbers LS24P
Size 24"
Material Refractory
Burner Empire 24" slope glaze burner, ordered separately (VFSR millivolt, VFSV variable remote, VFSE intermittent pilot or VFSM manual; or the VSR vented millivolt burner)
Certification ANSI Z21.11.2 (unvented heaters) and ANSI Z21.60 (vented decorative appliances), per the log set manual
Minimum firebox Set by the burner: 30" front width, 23" rear width, 14" deep, 18" high for VFSR, VFSV and VFSE; 34" front width, 27" rear width, 14" deep, 18" high for VFSM; 30" front width, 15" deep, 22" high for the vented VSR

Installation Requirements

  • Log placement: each log pins onto the burner in the position shown in the log set manual. Logs that do not sit firmly, or that are misformed or have loose pin holes, must be replaced.
  • Embers and lava rock: rock wool embers go on the front portion of the burner only; decorative lava rock goes on the firebox floor only, never on the burner.
  • Glass doors: keep any glass doors fully open while the fire is burning.
  • Soot: a properly installed set does not soot; if soot appears on a log, stop using it and call for service.
  • Codes: some state or local codes allow log sets only in a vented configuration; check yours. Vent-free installs must meet the burner's room size and bedroom/bathroom rules.
  • Installation: must be installed by a qualified installer per the burner and log set manuals and local codes. In Massachusetts the installation must be done by a licensed plumber or gas fitter.

Videos

Downloads

Warranty

The log set manual does not list warranty terms. Empire's vent-free log sets brochure refers buyers to empirehearth.com/warranty for current terms.