The Bromic Tungsten Smart-Heat Electric Select 2000W is an outdoor electric radiant heater from the updated Tungsten Electric collection, with a slimmer, lighter housing, a choice of finishes and optional front designs.
Key Features
- 2000W output from one heating element
- Soft-glow infrared elements and a spectral reflector for targeted radiant heat with reduced glare
- Slim, low-profile housing with a single-post mount, angle adjustable to aim the heat
- Comes with the Diamond pattern front; Oval and Triangle fronts are sold separately
- Wall, ceiling or flush recessed mounting; recessing uses the low clearance recess kit (sold separately)
- High-temperature, corrosion-resistant coating with an IPX5 water rating for outdoor use
- Finish: black
What to Order With It
Specifications
| Model numbers |
Black: BH0440212 (240V), BH0440222 (208V), BH0440232 (277V) |
| Output |
2000W |
| Elements |
1 |
| Heat area |
Up to 65 ft² |
| Electrical |
240V, 8.3A; 208V, 9.6A; 277V, 7.2A |
| Dimensions |
45" W x 7" H x 6" D |
| Weight |
13 lbs |
| Included mounting bracket |
5" |
| Minimum floor clearance |
Wall 72"; ceiling 96" |
| Water rating |
IPX5 |
| Certification |
Intertek ETL / cETL, 4005951 |
A licensed electrician must install the heater following the installation manual and local codes. Do not mount it vertically; that voids the warranty. Check the manual for all clearances.
Downloads
Warranty
Bromic Heating warranty for the original owner: two years on Tungsten Electric heaters, with seven years on the heating elements. Under the warranty Bromic supplies a replacement heater or part; labor, removal, reinstallation and shipping are the owner's cost. Read the full terms on the Bromic Heating warranty page.
/