The Bromic Tungsten Smart-Heat Electric 3000W is an outdoor and indoor electric radiant heater with a honeycomb mesh front, a high-temperature corrosion-resistant coating and stainless steel construction. This listing covers the black model for 208V supply.
Key Features
- 3000W output from one heating element
- Spectral reflector for strong radiant output with a soft glow
- Wall or ceiling bracket included, angle adjustable to aim the heat
- IPX4 water ingress rating for outdoor use
- Flush recessed mounting or 3 ft tube suspension with optional kits
What to Order With It
Specifications
| Model numbers |
Black 208V BH0420038-2 |
| Output |
3000W |
| Elements |
1 |
| Electrical |
208V, 14.42A |
| Heat area |
Up to 100 ft² (Tungsten manual) |
| Dimensions |
56" W x 8.5" H x 3.5" D |
| Weight |
22 lbs |
| Bracket length |
6.5" |
| Minimum floor clearance |
Wall 72"; ceiling 96" |
| Water rating |
IPX4 |
| Certification |
Intertek ETL / cETL, 4005951 |
A licensed electrician must install the heater following the installation manual and local codes. Do not mount it vertically. Keep at least 3 ft clear in front of the heater, and check the manual for the other clearances.
Downloads
Warranty
Bromic Heating warranty for the original owner: two years on Tungsten Electric heaters, with seven years on the heating elements. Under the warranty Bromic supplies a replacement heater or part; labor, removal, reinstallation and shipping are the owner's cost. Read the full terms on the Bromic Heating warranty page.
/