Skip to content
Free Shipping over $299 | Contact Us for Deals
Free Shipping over $299 | Contact Us for Deals

Empire Tahoe Clean Face Luxury 42" Direct Vent Gas Fireplace - Multi-Function

SKU DVCX42FP91N
Original price $0.00 - Original price $0.00
Original price $0.00
$5,329.00
$5,329.00 - $5,329.00
Current price $5,329.00

Free Shipping over $299


Please contact us directly to request quote for Empire products. 

  • FREE SHIPPING : All Over United States over $299

  • SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com

Empire Tahoe Clean-Face Luxury 42" Direct Vent Gas Fireplace, Multi-Function Control

The Empire Tahoe Clean-Face Luxury 42" with multi-function remote control (model numbers DVCX42FP91N for natural gas and DVCX42FP91P for propane) is a zero-clearance direct-vent gas fireplace with a large ceramic glass window and a clean-face design built for in-wall installation. Tile or other non-combustible material can conceal the outer edge for a built-in look.

It comes with a multi-function thermostat remote that controls the flame, the light and the blower, and the blower and light are built in. The log set and barrier screen are included.

Key Features

  • Up to 40,000 Btu/hr input on natural gas and 36,000 Btu/hr on propane
  • Ceramic glass with an included barrier screen
  • Log set included
  • Blower and light included, run from the multi-function remote
  • 5" x 8" direct venting from the top
  • Zero clearance to combustibles at the back, sides, floor and top standoffs
  • Optional liners: rustic brick, old world stone (with floor) or black porcelain
  • Optional fronts: forged iron doors with frame, or a beveled frame in oil-rubbed bronze or brushed nickel

What to Order With It

The fireplace ships with its log set and barrier screen. Everything below is optional.

Optional – Liners:

Optional – Fronts (fit over the included barrier screen):

Optional – Accessories:

Optional – Vent kits:

Optional – Conversion kits:

Specifications

Model numbers DVCX42FP91N, DVCX42FP91P
Framing (rough opening) 46 3/8" W x 42 5/16" H x 21 1/2" D
Appliance dimensions 46 1/4" W x 41 7/8" H x 22 1/16" D (face, without standoffs or nailing flanges)
Fireplace opening 39 15/16" x 27 1/2" (W x H)
Glass Ceramic, frame opening 36 7/8" x 24" (W x H)
Fuel Natural gas (N) or propane (P)
Input, maximum 40,000 Btu/hr natural gas; 36,000 Btu/hr propane
Input, minimum 27,000 Btu/hr natural gas; 29,000 Btu/hr propane
Venting Direct vent, 5" x 8", top
Control Multi-function with thermostat remote for flame, light and blower
Blower and light Included
Log set Included
Barrier screen Included
Gas connection 1/2" NPT
Installation type Zero clearance
Listing ANSI Z21.88/CSA 2.33
High altitude Above 2,000 ft in the US the input may need to be reduced with a smaller orifice; see the manual
Manufactured (mobile) home May be installed in an aftermarket, permanently located manufactured home (USA only) where local codes allow
Shipping weight 174 lb
Style Traditional, clean-face

Installation Requirements

  • Clearances to combustibles: back standoffs 0", side standoffs 0", floor 0", top standoffs 0".
  • Ceiling: at least 84" from the bottom of the fireplace to the ceiling.
  • Side wall: at least 6" from the side of the fireplace to an adjacent side wall.
  • Mantel: follow the mantel chart in the installation manual for any combustible mantel above the unit.
  • Framing: frame with a 2 x 4 header across the top; see the manual for finishing the face with non-combustible material.
  • Venting: 5" x 8" direct vent from the top. The longest horizontal run is 20 ft, with at least 8 ft of vertical rise; island and room-divider installs follow the same limit. Keep 1" beside and below horizontal pipe and 3" above it, using the SD58DVAWTEC wall thimble. Check the vent graph in the manual for your layout.
  • Power: run a 120V supply to the fireplace for the blower and light.
  • Installation: must be installed by a qualified installer per the installation manual and local codes.

Downloads

Warranty

Empire limited parts warranty for Tahoe Clean-Face Luxury fireplaces, from the warranty section of the installation manual:

  • Combustion chamber, heat exchanger and factory-installed glass: limited lifetime
  • All other components, except remote controls, thermostats, accessories and replacement parts: 3 years
  • Remote controls, thermostats, accessories and parts: 1 year

The warranty covers parts for the original purchaser. Full terms, including what is not covered, are in the warranty section of the installation manual.