Empire 30" Super Birch Burncrete Log Set

Empire 30" Super Birch Burncrete Log Set

The Empire 30" Super Birch log set (model number LS30CBS) is a set of Burncrete gas logs for Empire's 30" slope glaze burners: the vent-free VFSR, VFSV, VFSE and VFSM, or the vented VSR. This listing is the logs only; a 30" slope glaze burner is required and ordered separately.

Empire lists the Super Birch set in its log sets for slope glaze burners; it runs vent-free or vented depending on the burner you choose and your local codes.

Key Features

• Burncrete gas logs
• Made for Empire 30" slope glaze burners (VFSR, VFSV, VFSE, VFSM and the vented VSR)
• Logs only; burner ordered separately
• Vent-free or vented use, depending on the burner and local codes

What to Order With It

This listing is the log set only. The slope glaze burners come with the rock wool embers and lava rock.

Required – Burner (choose one 30" Empire slope glaze burner):

• Slope Glaze Burner, 30", Millivolt, Natural Gas (VFSR30NAT)
• Slope Glaze Burner, 30", Millivolt, Propane (VFSR30LP)
• Slope Glaze Burner, 30", Variable Flame Remote, Natural Gas (VFSV30NAT)
• Slope Glaze Burner, 30", Variable Flame Remote, Propane (VFSV30LP)
• Slope Glaze Burner, 30", Intermittent Pilot, Natural Gas (VFSE30N)
• Slope Glaze Burner, 30", Intermittent Pilot, Propane (VFSE30P)
• Slope Glaze Burner, 30", Manual, Natural Gas (VFSM30NAT)
• Slope Glaze Burner, 30", Manual, Propane (VFSM30LP)
• Vented Slope Glaze Burner, 30", Millivolt, Natural Gas (vented use only) (VSR30NAT)
• Vented Slope Glaze Burner, 30", Millivolt, Propane (vented use only) (VSR30LP)

Optional – Embers, grate, riser and hood:

• Ember Bed Kit, traditional (EK1)
• Platinum Glowing Embers (PE20)
• Log Riser, 2", for the 30" burner (LR30)
• Fireplace Hood, Black, adjustable (ELH1)

Specifications

Installation Requirements

• Log placement: place the logs on the burner as Empire's instructions show; logs that do not sit firmly must not be used.
• Embers and lava rock: rock wool embers go on the front portion of the burner only; decorative lava rock goes on the firebox floor only, never on the burner.
• Glass doors: keep any glass doors fully open while the fire is burning.
• Soot: a properly installed set does not soot; if soot appears on a log, stop using it and call for service.
• Codes: some state or local codes allow log sets only in a vented configuration; check yours. Vent-free installs must meet the burner's room size and bedroom/bathroom rules.
• Installation: must be installed by a qualified installer per the burner and log set manuals and local codes. In Massachusetts the installation must be done by a licensed plumber or gas fitter.

Downloads

• Installation Instructions and Owner's Manual, Slope Glaze Burners VFSR/VFSM (27829)
• Installation Instructions and Owner's Manual, Slope Glaze Burners VFSE/VFSV (47343)
• Empire Vent-Free Log Sets and Burners Brochure (00046)

Warranty

Empire's vent-free log sets brochure refers buyers to empirehearth.com/warranty for current warranty terms.