Kingsman 43" MCVP42 Multi-sided Clean View Peninsula Direct Vent Gas Fireplace
Free Shipping over $299
- FREE SHIPPING : All Over United States over $299
- SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com
Free Shipping over $299
Kingsman 43" MCVP42 Multi-sided Clean View Peninsula Direct Vent Gas Fireplace, Make the most of the best view in the house with our line of Zero Clearance Direct Vent Peninsula Gas Fireplaces. Ideally suited for new construction or renovations anywhere in your home.
This 3-Sided Kingsman Clean View Peninsula Direct Vent Gas Fireplace is a perfect choice for partition walls or walls that just stick out at the junction of three rooms in your home. This fireplace is a direct vent fireplace with a tempered glass front, utilizing either a detailed 8-piece log set or contemporary glass media. This Fireplace comes equipped with a reliable standing pilot valve system, allowing operation during power outages. This fireplace pairs with a full line of wall switches or remote controls. This low-profile fireplace frame allows a cleaner-looking installation, and Kingsman includes safety barrier screens to prevent accidental contact with hot surfaces.
To meet the needs of your installation, this fireplace can be customized in a variety of ways. In addition to fuel type, this unit can be purchased with a remote-ready millivolt ignition system or an intermittent pilot ignition (IPI). This fireplace also can be purchased with a variety of interior liner options to further customize your appliance. Finally, your choice of various log sets and fire glass options allows for a customized appearance to match your design tastes.
*Venting Requirements: This unit requires a venting pipe with an inner diameter of 5 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
| Model | MCVP42N/NE | MCVP42LP/LPE |
| Fuel | Natural | Propane |
| Flue | Top | Top |
| Gas Control | Millivolt / IPI | Millivolt / IPI |
| Input Max. | 30,250 BTU | 28,500 BTU |
| Input Min. | 21,000 BTU | 23,000 BTU |
| FE (p.4.1-02)% | 53.00% / 54.63% | 53.82% / 55.32% |
| Venting | 5/8" | 5/8" |
| Glass Size | 35 1/2"W x 22 21/32" H |
35 1/2"W x 22 21/32" H |
| Glass Type | Tempered | Tempered |
| Size (WxHxD) | 43 1/16"W x 42 1/4"H x 24 1/2"D |
43 1/16"W x 42 1/4"H x 24 1/2"D |
| Viewing Area | 33 1/2"W x 20 5/8"H |
33 1/2"W x 20 5/8"H |
| Venting | 5/8" Flex or 5/8" Hard Pipe* or Power Vent |
5/8" Flex or 5/8" Hard Pipe* or Power Vent |
| Electronic Ignition |
Yes | Yes |
| Certification | Heater | Heater |
| Power Vent | Yes | Yes |

For use with Bronze Glass Media, Cannonballs, and Driftwood Log Set
For use with the Glass Tray
Oak (8 piece) Set, and Driftwood (6 Piece) Set
Traditional
Wall Mount Millivolt Thermostat or Programmable Thermostat
Thermostat on/off, Thermostat on/off modulating, Thermostat on/off modulating and light control.
The battery holder provides power to the IPI system in case of power failures. Locating the battery holder outside of the fireplace (wall mount), provides a convenient and accessible location for battery installation and removal.
The MCVP42 is sold as the fireplace only. Kingsman requires either the log grate with a log set, or the glass tray with glass media; venting is ordered separately.
Required: log grate and log set (Kingsman’s price list marks the grate and oak set as not for propane units)
Or: glass tray and media (up to 5 lb on the burner and 20 lb on the tray)
Options
Thermostats (optional)
Remote controls for millivolt models (N / LP) (optional)
Remote controls for IPI models (NE / LPE) (optional)
Fuel conversion kit (only if converting between natural gas and propane)
Venting: 5"/8" direct vent (not included — your installer sizes the run per the manual)
Power venting (optional)