Invicta Symphonia 40" Cast Iron Wood Burning Stove
The Invicta Symphonia turns the fire into a design feature. Swirling lines on the doors echo the movement of the flames behind the glass, and the stove stands on a round pedestal base. Model number 6115-44.
Built by Invicta in Donchery, France, the Symphonia is EPA certified at 1.9 g/hr, takes logs up to 24" long and is rated to heat up to 2,500 sq ft, so the looks come with real heating capacity.
The Invicta Symphonia: Cast Iron Doors Inspired by the Flames
Up to 90,000 Btu/hr and 6+ hour burns make the Symphonia a main heat source for a living area. Its cast iron body holds the heat and gives it back slowly, so the room stays comfortable between loads.
The patterned doors and pedestal base make it a centerpiece for a living room, a den or a reading corner, in a modern or a traditional setting. For a plain front in the same size, see the Theia, or browse our other wood stoves.
The Symphonia vents through a 7" flue at the top to a listed Type HT (UL 103HT) chimney or a lined masonry chimney. An existing 8" flue can be used with a reducer, and Invicta offers a 7" to 8" flue adaptor (model number ED-BVS-8000). With a single-wall connector it needs 19" behind, 18" at the sides and 21" in a corner. With a double-wall connector and Invicta's optional rear heat shield (model number ED-HSB-1001), the rear clearance drops to 12". It sits on non-combustible floor protection at least 56-1/4" x 33", and no insulated hearth pad is needed.
Features
-
EPA 2020 certified: tested at 1.9 g/hr of particulate emissions to the EPA 2020 standard.
-
Flame pattern doors: swirling lines on the doors mirror the movement of the fire.
-
All cast iron: cast iron stores heat and gives it back gradually, so the room stays warm as the fire burns down.
-
Post-combustion system: preheated air enters the firebox from the rear to burn off gases for a cleaner, more complete burn.
-
Clean-glass air wash: an even flow of secondary air sweeps the inside of the glass to help keep it clear.
-
Long burns: up to 6+ hours on a full load of logs up to 24" long.
-
Outside air option: the stove can take outside combustion air through a 3" duct.
Package Contents
- Invicta Symphonia cast iron wood stove (model number 6115-44)
- Owner's manual with installation and operating instructions
- Glove for the cold handle
What to Order With It
Required for installation (not included):
- 7" listed Type HT (UL 103HT) chimney, or a code-approved masonry chimney with a flue liner
- 7" stove connector pipe
- Non-combustible floor protection at least 56-1/4" x 33"
Optional:
Specifications
| Model number |
6115-44 |
| Fuel |
Cordwood, logs up to 24" long |
| Maximum heat output |
90,000 Btu/hr |
| Emissions |
1.9 g/hr (EPA 2020 standard) |
| Efficiency |
62.5% weighted average (HHV) |
| Heating capacity |
Up to 2,500 sq ft |
| Firebox volume |
2.32 cu ft |
| Burn time |
Up to 6+ hours |
| Flue |
7" diameter, top exit |
| Chimney |
Listed Type HT (UL 103HT) chimney or a code-approved masonry chimney with a flue liner; 15 ft to 45 ft recommended height; draft 0.06" to 0.10" WC |
| Dimensions (H x W x D) |
36" x 40-3/4" x 19-1/2" |
| Weight |
485 lb |
| Color |
Anthracite |
| Base |
Pedestal |
| Clearances, single-wall connector |
Back 19", sides 18", corner 21" |
| Clearances, double-wall connector with rear heat shield |
Back 12", sides 18", corner 21" |
| Floor protection |
Non-combustible, at least 56-1/4" x 33"; no insulated hearth pad required |
| Outside air |
Optional connection for a 3" duct (supplied by others) |
| Listing |
EPA certified to the 2020 standard; UL 1482 |
| Mobile home |
Not approved |
| Made in |
France |
Bring the Invicta Symphonia Home with Dreamwood Living
The Symphonia suits a homeowner who wants a stove that reads as a piece of design and still heats the house. Reach out to our team with your room size and chimney details, and we will help you plan the installation.
FAQs
How large a space can the Symphonia heat?
Invicta rates the Symphonia to heat up to 2,500 sq ft. Insulation, ceiling height, layout and climate all change the real figure.
Can it connect to an 8" chimney?
Yes. The stove has a 7" flue, and Invicta allows an existing 8" flue with a reducer. Invicta's 7" to 8" flue adaptor is model number ED-BVS-8000. For a new chimney, Invicta specifies 7".
How close can it go to a wall?
With a single-wall connector: 19" at the back, 18" at the sides and 21" in a corner. With a double-wall connector and the optional rear heat shield, the back clearance is 12".
Can it go in a mobile home?
No. Invicta does not approve this stove for mobile home installation.
Documents & Downloads
Warranty
Invicta limited warranty:
- 10 years on the cast iron firebox body.
- 3 years on all cast iron components.
- 1 year on all other components, such as gaskets and glass.
Invicta's owner's manual adds that signs of over-firing void the warranty, so burn only dry cordwood at the loads it describes.
