Skip to content
Free Shipping over $299 | Contact Us for Deals
Free Shipping over $299 | Contact Us for Deals

Fire Magic 24" 2-Burner Aurora A430i Built-In Gas Grill w/ Analog Thermometer

SKU A430i-8LAN
Original price $4,798.80 - Original price $5,643.90
Original price
$5,643.90
$4,798.80 - $5,643.90
Current price $5,643.90

Free Shipping over $299

  • FREE SHIPPING : All Over United States over $299

  • SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com

Fire Magic 24" 2-Burner Aurora A430i Built-In Gas Grill w/ Analog Thermometer

The Fire Magic Aurora A430i is a 24" built-in gas grill, offered with a rotisserie backburner and complete rotisserie kit (order numbers beginning A430i-8) or without one (A430i-7). Its 2 cast stainless steel burners are rated at 50,000 BTU under patented Diamond Sear cooking grids, for a 24" x 18" (432 sq. in.) cooking area, with an analog thermometer in the lid and interior halogen lights.

An infrared sear burner on the left side is available in place of a conventional burner (order numbers with "L"). The grill needs a 120V GFCI outlet for the hot surface ignition and lights, and is sold as natural gas or propane: choose the fuel when you order.

Key Features

  • 50,000 BTU from 2 cast stainless steel "E" burners
  • Optional recessed rotisserie backburner (11,000 BTU) with cover and full rotisserie kit with counter balance (order numbers beginning A430i-8)
  • 24" x 18" (432 sq. in.) of heavy duty Diamond Sear cooking grids
  • Optional infrared sear burner on the left side (order numbers with "L")
  • 120 VAC plug-in supply with 12 volt transformer; push-to-light hot surface ignition with flash tubes
  • Polished, back-lit control knobs on a seamless control panel with polished trim
  • Analog thermometer in the lid reading up to 1000 F
  • 12 volt halogen interior oven lights
  • Seamless double wall 90 degree hood with Feather-Lite easy lift lid
  • Heavy gauge stainless steel flavor grids and adjustable warming rack
  • 10" drip tray with disposable foil tray liners; 12" deep firebox
  • Pre-assembled 1/2" x 36" stainless steel gas flex connector and cooking grid lifter
  • Made in the USA of 304 stainless steel; CSA / ANSI Z21.58 certified

What to Order With It

The backburner versions ship complete with their rotisserie kit. Order the items below to suit your island.

Required for a combustible enclosure:

  • Insulating Liner (23130-52) - the manual requires it whenever the island is built from combustible materials

Optional:

Specifications

  • Order numbers, natural gas: A430i-7EAN, A430i-7LAN, A430i-8EAN, A430i-8LAN
  • Order numbers, propane: A430i-7EAP, A430i-7LAP, A430i-8EAP, A430i-8LAP
  • Model code key: "-8" backburner and rotisserie kit, "-7" no backburner; "E" all conventional burners, "L" infrared burner on the left side
  • Size code: A43
  • Fuel: Natural gas or propane (order one)
  • Cooking area: 24" x 18" (432 sq. in.)
  • Main burners: 50,000 BTU (2 cast stainless steel burners)
  • Rotisserie backburner: 11,000 BTU (-8 versions)
  • Total: 61,000 BTU (-8 versions)
  • Cut-out (W x D x H): 25 1/2" W x 19 1/2" D x 11 1/2" H
  • Control panel width: 26 1/2" (not included in the cut-out width)
  • Thermometer: Analog, in the lid
  • Ignition: 120 VAC / 12 volt hot surface
  • Electrical: 120VAC, 15 amp minimum, GFCI grounded three-wire receptacle
  • Gas supply pressure: Natural gas 7" w.c. normal (5" min, 10 1/2" max); propane 11" w.c. normal (10" min, 13" max)
  • Clearance to combustible construction: 18" rear (14" to a protected combustible wall, 4" to a non-combustible wall), 18" sides, 24" corners
  • Overhead construction: Not under combustible overhead construction unless installed with a UL 710 approved heavy duty vent hood (1200 CFM minimum exhaust fan); 5 ft minimum from countertop to overhead construction
  • Shipping weight: 170 lbs
  • Carton: 32 1/2" L x 31 1/4" W x 33 1/4" H
  • Certification: CSA / ANSI Z21.58
  • Made in: USA

The cut-out is the opening in the island countertop; every built-in grill also has a hanger that extends beyond these dimensions. Confirm the opening against the installation manual before cutting.

Documents & Downloads

Warranty

  • Lifetime: cast stainless steel burners, Choice stainless steel U-shaped burners, Diamond Sear cooking grids and stainless steel housings
  • Fifteen (15) years: brass valves, inner liners, manifold assemblies and backburner assemblies (except ignition parts)
  • Five (5) years: flavor grids and infrared burners in the grill
  • Three (3) years: all other grill components (except ignition and electronic parts)
  • One (1) year: ignition systems (except batteries), electronic components including lights and thermometers, and accessories
  • Fire Magic pays a warranty labor allowance for the first two years

Warranty applies to the original purchaser with proof of purchase, for single family residential use.

*PLEASE REFER TO PRODUCT MANUAL FOR EXACT INSTALLATION INSTRUCTIONS.