Empire Whitewashed Herringbone Brick Liner for the 50" Rushmore Fireplace

Empire Whitewashed Herringbone Brick Liner for the 50" Rushmore Fireplace

The Empire DVP50CPWH (model number DVP50CPWH) is the whitewashed herringbone brick ceramic fiber liner for the Rushmore 50 clean-face direct-vent fireplace (DVCT50CBP95). One liner is required with the fireplace, and this is one of four 50" options.

Whitewashed herringbone liners for the other Rushmore sizes are on the 30/35 and 36/40 liner pages.

Fits

• Empire Rushmore 50" Clean Face Direct Vent Gas Fireplace

Related Parts

• Other Rushmore 50 liners: fire brick, old world stone, black porcelain
• Liners for the Rushmore 36 and 40
• Liners for the Rushmore 30 and 35 inserts

Specifications

Installation Notes

• Required: the fireplace manual says a liner kit and log set must be purchased and installed before the fireplace can be operated.
• Installation: remove the barrier screen and glass door, then fit the floor, rear, side and top pieces with the supplied bracket and screws, following the liner kit instructions. A Phillips screwdriver is the only tool needed.

Downloads

• Liner Kit Instructions, Whitewash Herringbone, DVCT50 (41658)
• Installation Instructions, Rushmore DVCT50CBP95-2 (42996)

Warranty

Empire's warranty in the fireplace's installation manual covers remote controls, thermostats, accessories and replacement parts for 1 year (parts), for the original purchaser. Full terms are in the warranty section of the installation manual.