Empire Rushmore 30"/35" Insert Driftwood or Charred Log Sets

Empire Rushmore 30"/35" Insert Driftwood or Charred Log Sets

These Empire ceramic fiber log sets fit the Rushmore 30" (DVCT30CB) and 35" (DVCT35CB) direct-vent inserts: driftwood (LS30DINF, LS35DINF) or traditional charred (LS30TINF, LS35TINF). Each insert needs one log set of its size.

Key Features

• Ceramic fiber log sets for Rushmore inserts
• Driftwood or traditional charred
• 30" and 35" sizes
• One log set required per insert

What to Order With It

This listing is the log set only.

Required for these fireplaces (one log set per fireplace):

• Rushmore 30" Direct Vent Gas Fireplace Insert (DVCT30CBN95N)
• Rushmore 35" Direct Vent Gas Fireplace Insert (DVCT35CBN95N)

Specifications

Installation Requirements

• Log placement: each log goes in the position shown in the log set manual, on its locating pins where the manual shows them. Do not move logs or add pieces.
• Embers: pull the ember material apart into small, dime-size pieces and spread it one layer thick where the manual shows.
• Installation: must be installed by a qualified installer per the log set and fireplace manuals and local codes. In Massachusetts the installation must be done by a licensed plumber or gas fitter.

Downloads

• Log Set Manual, LS30DINF (38800)
• Log Set Manual, LS30TINF (38105)
• Log Set Manual, LS35DINF (38801)
• Log Set Manual, LS35TINF (38463)

Warranty

The log set manual does not list separate warranty terms. See the fireplace manual for the appliance warranty, and make claims through the dealer where you bought it.