Empire Liners for Tahoe Premium 48" Fireplace

Empire Liners for Tahoe Premium 48" Fireplace

The Empire DVP4DH (model number DVP4DH) is the herringbone brick liner for the Tahoe Premium 48" direct-vent fireplace. Empire's literature describes it as having burnt umber bricks in a herringbone pattern with light mortar, plus smoked accents. The Premium 48 liner choices are the DVP4DA aged brick, DVP4DH herringbone brick and DVP48KR black porcelain.

Fits

• Empire Tahoe Premium 48" Direct Vent Gas Fireplace

Related Parts

• Aged brick liner, 48" Premium (DVP4DA)
• Black porcelain liner, 48" Premium (DVP48KR)
• Conversion kits for the Tahoe Premium 48"

Specifications

Installation Notes

• Installing (louvered models): the fireplace manual's steps: wearing gloves, unpack and check the panels; lower the bottom louver and remove the upper louver; remove the glass frame and the rear logs; set the rear panel against the back wall (its top edge has a half-moon cutout for the flue opening), then the side panels, then the top panel, bending the holder's hold-down tabs over it with needle-nose pliers; then replace the logs, glass frame and louvers.
• Service: the Premium and Luxury manuals say not to operate the fireplace with a liner removed, cracked or broken; replacement should be done by a licensed or qualified service person.
• Liner styles: the liner descriptions above are from Empire's literature, which says its brick liners are made from ceramic fiber.

Downloads

• Installation Instructions and Owner's Manual, Tahoe Premium DVP42/48FP (43152)
• Empire Tahoe Fireplaces Brochure (00641)

Warranty

Empire's warranty in the fireplace's installation manual covers remote controls, thermostats, accessories and replacement parts for 1 year (parts), for the original purchaser. Full terms are in the warranty section of the installation manual.