Empire Carol Rose 60" Outdoor Linear Gas Fireplace, See-Through
The Empire Carol Rose 60" see-through outdoor linear fireplace (model numbers OLL60SP12SN and OLL60SP12SP) is a stainless steel outdoor gas fireplace with a long flame over a bed of crushed glass and built-in LED lighting. It is for outdoor use only and frames into an outdoor wall that is open on both sides.
It lights with a manual valve and push-button igniter. Clear frost crushed glass is required and ordered separately; accent glass, a liner, a weather door, wind deflector glass, a drain tray and a gas timer can be added.
Key Features
- Up to 65,000 Btu/hr, down to 39,000
- Stainless steel, for outdoor use
- See-through: open on both faces
- Built-in LED lights under the glass media
- Manual control with push-button igniter
- Clear frost crushed glass required, ordered separately
What to Order With It
The fireplace ships with its wind deflector glass panels, non-combustible facing panels, receptacle and an AA battery for the igniter. It needs clear frost crushed glass before it can run.
Required – Clear frost crushed glass (10 bags for the 60"; one bag covers about 1 sq ft):
Optional – Accent crushed glass and glass drops (mixed in with the clear frost glass; drops go on top, out of the flame):
-
Crushed Glass, Bronze Reflective, about 1 sq ft (DG1BZR)
-
Crushed Glass, Copper Reflective, about 1 sq ft (DG1BCR)
-
Crushed Glass, Black Polished, about 1 sq ft (DG1BKP)
-
Crushed Glass, Blue Clear, about 1 sq ft (DG1BUC)
-
Glass Drops, 1", Onyx Solid (DG1NXS)
-
Glass Droplets, 1/2", Glacier Ice (DG1GC)
Optional – Liner:
Optional – Weather door, wind deflector and drain tray (order two doors and two deflectors for a see-through):
Optional – Gas supply timer:
Optional – Conversion kits:
Specifications
| Model numbers |
OLL60SP12SN, OLL60SP12SP |
| Firebox face |
63 3/4" W x 30 7/8" H |
| Firebox opening |
60" x 16 3/16" (W x H) |
| Wind deflector glass |
59 3/8" x 3 1/2" (W x H) (one per open side) |
| Framing (rough opening) |
64" W x 31" H x 22 1/2" D |
| Fuel |
Natural gas (N) or propane (P); a conversion kit is available |
| Type |
Outdoor gas fireplace, ANSI Z21.97/CSA 2.41; outdoor use only; no oxygen depletion sensor |
| Input, maximum |
65,000 Btu/hr, natural gas and propane |
| Input, minimum |
39,000 Btu/hr, natural gas and propane |
| Control |
Manual gas valve with thermocouple safety and push-button igniter (AA battery included) |
| Lighting |
Built-in LED lights under the crushed glass; need a 120V GFI outlet on the valve side |
| Media |
Clear frost crushed glass required, ordered separately |
| Gas connection |
Flex line to the valve; 1/2" NPT shutoff valve outside the unit |
| High altitude |
Above 2,000 ft the input should be reduced 4% per 1,000 ft; see the manual |
| Style |
Contemporary linear, see-through |
Installation Requirements
-
Location: outdoor use only, on a patio, in a yard, on a covered porch, in a gazebo or on an outside wall of a house; never inside a building, garage or other enclosed area. A porch needs at least 96 sq ft of floor area and a 90" ceiling. It cannot open to the inside of a house. A partial enclosure must have either walls on all sides with no overhead cover, an overhead cover with no more than two side walls, or an overhead cover with three side walls and at least 30% of the perimeter permanently open (more if the open side is screened). Shelter it from direct wind.
-
Clearances: at least 6" from the inside of the fireplace to a combustible side wall; at least 24" from the top of the opening to the ceiling. In an alcove, the alcove must be at least 72" wide and no more than 24" deep.
-
Mantel: a combustible mantel must meet the mantel chart in the installation manual.
-
Support and drainage: set the fireplace on a frame or supports that touch all four bottom edges at least 3 1/2" above the floor. Water must be able to drain away from the unit; the optional drain tray needs about 6" more enclosure height.
-
Power: a 120V GFI outlet outside the fireplace on the valve side for the LED lights.
-
Installation: must be installed by a qualified installer per the installation manual and local codes. In Massachusetts the installation must be done by a licensed plumber or gas fitter.
Downloads
Warranty
Empire limited parts warranty, from the warranty section of the installation manual:
- All components, except remote controls, thermostats, accessories and replacement parts: 5 years parts
- Remote controls, thermostats, accessories and parts: 1 year parts
The warranty applies to the original purchaser. Full terms, including what is not covered, are in the warranty section of the installation manual.
