Original price
$2,795.00
-
Original price
$3,005.00
Original price
$2,795.00
$2,795.00
-
$3,005.00
Current price
$2,795.00
| /
Free Shipping over $299
Please contact us directly to request quote for Empire products.
FREE SHIPPING : All Over United States over $299
SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com
Empire Boulevard 36" Vent-Free Linear Gas Fireplace
The Empire Boulevard 36" vent-free (model numbers VFLB36FP30N, VFLB36FP30P, VFLB36FP90N, VFLB36FP90P) is a linear gas fireplace that needs no chimney or vent pipe. It is 11" deep and is meant for supplemental heat.
Choose millivolt control with an on/off remote, which runs without house power, or intermittent pilot with a thermostat remote. The barrier screen and non-combustible board come with it. Crushed glass, liners, a log set, a light kit and fronts can be added.
Key Features
Up to 28,000 Btu/hr input on natural gas or propane
Vent-free: no chimney or vent pipe
11" deep
Barrier screen and non-combustible board included
Millivolt or intermittent pilot control, each with a remote
Optional liners, log set and beveled fronts
Optional heat management kits
What to Order With It
The fireplace ships with its barrier screen, remote and non-combustible board. Decorative glass or rocks are optional; the burner cover takes about 1.75 sq ft.
Optional – Crushed glass for the burner cover (about 1.75 sq ft):
42 1/2" W x 41 5/8" H x 11 1/2" D (clean-face finish; see the manual for the flush finish and corner openings)
Appliance dimensions
42 3/16" W x 22 1/2" H x 11" D (firebox face, without nailing flanges or standoffs; 19" to the top of the standoffs)
Fireplace opening
38 1/16" x 14 1/8" (W x H)
Fuel
Natural gas (N) or propane (P); order the model for your gas, field conversion is not permitted
Type
Vent-free (no chimney or vent); oxygen depletion sensor
Input, maximum
28,000 Btu/hr, natural gas and propane
Input, minimum
19,000 Btu/hr natural gas; 22,000 Btu/hr propane
Control
Millivolt with FRBC on/off remote (models ending 30N/30P), or intermittent pilot with thermostat variable remote and AC adapter (models ending 90N/90P)
Lighting
Optional (LK5 lighting kit, needs a switch or rheostat)
Media
Optional crushed glass or rocks on the burner cover, about 1.75 sq ft
Barrier screen
Included
Gas connection
Enters on the left side
Manufactured (mobile) home
May be installed in an aftermarket manufactured home where state or local codes allow
Shipping weight
92 to 100 lb, depending on model
Style
Contemporary linear
Installation Requirements
Ceiling: at least 36" of clearance to the ceiling and to the top of the enclosure, measured as the manual shows.
Facing: the non-combustible board supplied with the fireplace must cover the area above and beside the opening as the manual shows (22 1/2" above for the clean-face finish, 20 1/2" for the flush finish).
Mantel: follow the mantel chart in the installation manual; a combustible mantel can project 2" at 18" above the fireplace opening, up to 12" at 28".
Floor: on carpet, tile or any combustible floor other than wood, set the fireplace on a metal or wood panel the full width and depth of the unit.
Room size: the room must be an unconfined space of at least 50 cubic feet per 1,000 Btu/hr of input (adjoining rooms count only if there is no door between them), or extra combustion air must be provided as the manual describes. With an input above 10,000 Btu/hr, it may not be installed in a bedroom or bathroom. Check local codes before you buy; some areas restrict vent-free appliances.
Installation: must be installed by a qualified installer per the installation manual and local codes.
Power: millivolt models run without house power; intermittent pilot models use the included AC adapter. The optional LK5 light needs a 120V supply, entering on the left side.
