Original price
$7,069.00
-
Original price
$7,069.00
Original price
$7,069.00
$7,069.00
-
$7,069.00
Current price
$7,069.00
| /
Free Shipping over $299
Please contact us directly to request quote for Empire products.
FREE SHIPPING : All Over United States over $299
SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com
Empire Boulevard 72" Vent-Free Linear Gas Fireplace
The Empire Boulevard 72" vent-free (model numbers VFLB72FP90N, VFLB72FP90P) is a linear gas fireplace that needs no chimney or vent pipe. It is 11 1/16" deep and is meant for supplemental heat.
It runs on intermittent pilot with a thermostat remote and has LED lighting under the burner. The barrier screen and non-combustible board come with it. Crushed glass for the burner is required and ordered separately; liners, a log set and fronts can be added.
Key Features
Up to 40,000 Btu/hr input on natural gas and 38,500 Btu/hr on propane
Vent-free: no chimney or vent pipe
11 1/16" deep
Barrier screen and non-combustible board included
Intermittent pilot with thermostat remote; LED lighting under the burner
Optional liners, log set and beveled fronts
Optional heat management kits
What to Order With It
The fireplace ships with its barrier screen, remote and non-combustible board. It needs 6 sq ft of crushed glass before it can run. Clear frost is recommended; clear and translucent glass lets the LED light show through.
May be installed in an aftermarket manufactured home where state or local codes allow
Style
Contemporary linear
Installation Requirements
Ceiling: at least 36" of clearance to the ceiling and to the top of the enclosure, measured as the manual shows.
Facing: the non-combustible board supplied with the fireplace must cover the area above and beside the opening as the manual shows (22 1/2" above for the clean-face finish, 20 1/2" for the flush finish).
Mantel: follow the mantel chart in the installation manual; a combustible mantel can project 2" at 18" above the fireplace opening, up to 12" at 28".
Floor: on carpet, tile or any combustible floor other than wood, set the fireplace on a metal or wood panel the full width and depth of the unit.
Room size: the room must be an unconfined space of at least 50 cubic feet per 1,000 Btu/hr of input (adjoining rooms count only if there is no door between them), or extra combustion air must be provided as the manual describes. With an input above 10,000 Btu/hr, it may not be installed in a bedroom or bathroom. Check local codes before you buy; some areas restrict vent-free appliances.
Installation: must be installed by a qualified installer per the installation manual and local codes.
Power: run a 120V supply to the fireplace, entering on the left side; the intermittent pilot uses the included AC adapter.