Dimplex Ignite Bold 50" Linear Electric Fireplace
Free Shipping over $299
- FREE SHIPPING : All Over United States
- NO SALES TAX : All USA Orders/except WI
- SPEAK TO AN EXPERT : Call 888-486-2909 or email at cs@dreamwoodliving.com
Free Shipping over $299
The Dimplex Ignite Bold 50" Linear Electric Fireplace (model XLF5017-XD, Dimplex order number X-XLF5017-XD) is the deep, three-sided member of the Ignite range — front glass plus two side glass panels, with a mirrored rear pane that doubles the apparent depth of the flame. Dimplex previously sold this range as IgniteXL® Bold; the name changed, the model codes did not.
Everything needed for five different installations is in the one box: front-facing, left corner, right corner, bay, and modular runs of several units linked together. Open side trim shows the side glass; closed side trim blanks it off.
Frame to these dimensions. They are the same for front, corner and bay installations, and assume a 1/2" drywall finish:
| Framing width | 49 1/2" (1,257 mm) |
| Framing height | 24 1/4" (616 mm) |
| Framing depth, minimum | 11 5/8" (295 mm) |
| Appliance dimensions (W x H x D) | 50 1/2" x 23 7/8" x 12 1/8" (128.4 x 60.7 x 30.6 cm) |
| Viewing area (W x H x side glass depth) | 48 7/8" x 16 3/8" x 5 1/2" (124.2 x 41.6 x 14.0 cm) |
| Recommended mounting height from the floor | Between 5" (13 cm) and 40" (102 cm) |
Two things the framer needs to know. This fireplace is not load-bearing — frame the opening so the weight of the wall above never rests on the top of the unit. And the power comes in at the top right back corner of the firebox, so plan the cable route before the wall closes.
For a modular run of several units, the framed width is simply the sum of the unit widths; the linking brackets come in the XLFXDLINK kit, which we stock.
| Voltage | 120 V (3-wire) or 240 V (4-wire) |
| Power output — 120 V | 1,500 W (5,118 BTU/h) |
| Power output — 240 V | 2,500 W (8,530 BTU/h) |
| Current draw | 12.5 A at 120 V / 10.4 A at 240 V |
| Circuit | Dedicated, properly fused 15 A circuit, rated for the voltage used |
| Connection — 120 V | Hardwired, or the XLFXDPLUG plug kit |
| Connection — 240 V | Hardwired only — 4-wire supply (L1, L2, neutral, ground) |
| Supplemental heating area | Up to 1,000 sq ft |
Note the 12.5 A draw at 120 V against a 15 A circuit — this needs its own dedicated circuit, not a shared one.
| Minimum clearance above the fireplace to the ceiling | 24" (61 cm) |
| Minimum clearance below the fireplace to the floor | 5" (13 cm) |
| Combustible materials in front (furniture, bedding, curtains, papers) | 3 ft (0.9 m) minimum |
| Surface temperature 7" above the unit, in normal heat mode | Does not exceed 40 °C (104 °F) |
That last figure is the one people ask about when planning a TV above the fireplace, and the Bold measures it closer in than most — 7" rather than 10". It holds only if the heater inlet and outlet stay unobstructed. Check your TV manufacturer's own ambient temperature limit as well.
The Ignite Bold is certified for outdoor installation under a shelter — never open to the weather. Dimplex sets a specific rule for the shelter: the height above the fireplace must be no more than three times the depth the shelter projects, measured from the bottom of the fireplace to the bottom edge of the overhang, and from the exposed face of the fireplace to the parallel edge of the overhang. So an overhang 9 ft above the fireplace has to extend at least 3 ft outwards on every side. A ground-fault protected circuit is recommended, and outdoor units should be inspected seasonally rather than yearly.
Warranty differs by location: 5 years indoor, 1 year outdoor. One caution — the copy of the installation guide circulating on retail sites is revision R09, which predates the outdoor certification and still says not to use the fireplace outdoors. The current revision (R10) covers it. If you are installing outdoors, ask us for the current guide rather than working from whichever PDF a search turns up.
| Model | XLF5017-XD |
| Dimplex order number | X-XLF5017-XD |
| Series | Dimplex Ignite Bold® (previously IgniteXL® Bold) |
| Fuel | Electric — no venting, gas line or chimney required |
| Installation type | Built-in — front, left corner, right corner, bay, or modular; all trim options in the box |
| Glazing | Three glazed sides — front glass and two side glass panels, plus a mirrored rear pane |
| Location | Indoor, or outdoor under a shelter |
| Flame effect | Multi-Fire XD®, multi-layered colour, seven presets |
| Flame-effect-only mode | Yes — heater switchable at the controls or hard-disconnected at installation |
| Heat source | Concealed Comfort$aver® ceramic heater with Eco and Boost modes |
| Air circulation mode | Yes — moves room air without heating |
| Timer | Yes — up to 8 hours |
| Thermostat and automatic shut-off | Yes, both built in |
| Controls | Hidden touch controls, remote, and the Dimplex Flame Connect app |
| Remote battery | CR2032 (longer life) or CR2025, 3 V |
| Ambient light sensor | Yes — adjusts brightness day to night |
| Media included | 2 bags of small acrylic crystals, 5 large, 3 extra-large, plus driftwood |
| Accessories | XLFXDPLUG plug kit and XLFXDLINK linking kit, both sold separately |
| Certification | cULus listed, file E71416 |
| Warranty | 5 years limited indoor (1 year outdoor) from date of first purchase, including on-site service |
Need the current installation and user's guide (revision R10)? Contact us and we will send it — the copy indexed by search engines is the older R09.
/