Ortal

Choosing an Ortal fireplace

Start with wall depth

The E-Lectra frames into 11 3/4" of depth. The Holographic needs 17 1/4", because the screens that make the flame sit behind the logs. Both are deeper than a standard stud wall, so plan a framed chase or use an existing chimney breast, and measure the depth you have before choosing a series.

LED or holographic flame

The E-Lectra uses an LED flame across ceramic logs, with 11 flame styles and colors, adjustable speed and separate brightness for the logs and fuel bed. The Holographic projects a three-dimensional flame with two screens behind anti-reflective glass, with six flame styles, adjustable flame height and speed, and an optional crackling sound. The difference is easiest to judge in person or on video.

One, two or three sides

Every model ships as a single-sided unit and converts to a left corner, right corner or three-sided fireplace by removing side conversion panels. The configuration changes the framed opening, so settle it before the wall goes up and frame to the drawing for that model.

Power and placement

All models run on 120V at 1200W and come with a 6.5 ft power cord, so plan an outlet within reach of the unit and out of sight. They install into a stud and drywall frame or an existing chimney breast, not floating or hung on a wall. Keep a TV or artwork at least 8" above the top of the glass, and for the Holographic, Ortal suggests mounting the unit 16" to 18" off the floor.

Logs and media

Each E-Lectra comes with Woodland Split ceramic logs, wood chippings and black vermiculite. Optional log sets change the look to Silver Birch Split, Woodland Continental or Silver Birch Continental, sized to each E-Lectra width. The Holographic comes with its own Woodland log set and amber and clear glass.

Get the drawings before you frame

Each product page links the installation manual, the product drawing and the framing guide for that size. Hand them to whoever is building the wall, because a built-in fireplace finished flush is costly to reframe.

Ortal fireplace FAQs

What is the difference between the E-Lectra and the Holographic?

The flame and the depth. The E-Lectra uses an LED flame with 11 styles and frames into 11 3/4" of depth. The Holographic projects a 3D flame with dual screens and needs 17 1/4". The E-Lectra comes in five widths; the Holographic in two.

Do Ortal electric fireplaces need venting or a gas line?

No. They are electric, so there is no flue, chimney liner or gas line. They plug into a standard 120V outlet on a 6.5 ft cord.

Can I run the flame without the heat?

Yes. The 1200W heater is switched separately from the flame on both series, so you can run the fire alone or with heat. The heater has a thermostat you can set from the remote or app.

Can an Ortal fireplace go in a corner or be three-sided?

Yes. Every E-Lectra and Holographic converts from single-sided to left corner, right corner or three-sided by removing side conversion panels. Frame to the drawing for the configuration you choose.

Can I change the logs on an E-Lectra?

Yes. Woodland Split logs come with every E-Lectra, and optional log sets are available in Silver Birch Split, Woodland Continental and Silver Birch Continental. Order the set that matches your E-Lectra width.

What warranty comes with an Ortal electric fireplace?

Ortal lists a 5-year limited warranty on both series. For the E-Lectra, the first year covers parts and labor and years two through five cover parts, with consumable items such as glass and LEDs covered for 12 months; the full terms are in the E-Lectra manual. The Holographic 5-year warranty is stated in the Holographic brochure.

Related collections

• Built-in electric fireplaces
• Electric fireplaces
• Linear fireplaces
• See-through and multi-sided fireplaces
• Electric log sets