Empire Carol Rose Linear 48" Outdoor Fire Pit
The Empire Carol Rose Linear 48" Outdoor Fire Pit is available with integrated multi-color LED lighting in 48-inch (55,000 Btu) and 60-inch (65,000 Btu) models. The reliable spark ignition systems and three-position gas valve allows you to light the fire in seconds and set the flame height to suit any occasion. With exterior surfaces built with 11-gauge marine-grade 316 stainless steel, the fire pit will bring sparkle to your outdoor space for many years.
For Outdoor Installation
Requires Decorative Crushed Glass, 6 sq. ft. for 48-in / 7 sq. ft. for 60-in (Glass Drops or Droplets may be added to area surrounding burner)
Includes Manual Electronic Ignition with AA Battery & 3-Stage Manually Variable Flame
Empire Carol Rose Manual Outdoor Linear Fire Pit is available in 48" and 60" sizes.
*Please Note: This fire pit DOES NOT come with an enclosure, it must be built in to an enclosure. There is no table or base included within this unit.
Features
-
Overall Dimensions: 53″ (W) x 23.87″ (D) x 7.37″ (H)
-
Weight: 103 lbs
-
Material: Stainless Steel
-
Ignition System: Push-button Manual Ignition
-
BTUs: 55,000
-
Fuel: Natural Gas or Propane Gas
-
Location: Outdoor
-
Internal Enclosure Dimensions:
- Width: 52.5″ Max. / 51.75″ Min.
- Height: 7.5″ Min
- Depth: 23.5″ Max. / 22.62 Min.
- Flame can be set to low, medium, or high
- Exterior surfaces built with 11-gauge marine-grade 316 stainless steel
- A sensor continuously monitors the flame and shuts off the gas if high wind or rain extinguishes the fire
- Fire Pit Enclosure is not included, it must be assembled in to an enclosure
*Please Note: This item requires Decorative Crushed Glass (6 square feet required for 48") (Glass Drops or Droplets may be added to area surrounding burner.)
Downloads
Installation Requirements
-
Clearances to combustibles: At least 3-1/4" from the edge of the glass bed to a combustible side wall and 12" to a combustible rear wall; no vinyl siding within 24" of the edge of the glass bed
-
Overhead clearance: Ceiling at least 48" above the top surface of the fire pit
-
Enclosure: Must be built into an enclosure (not included) with inside dimensions 51-3/4" to 52-1/2" wide, 22-5/8" to 23-1/2" deep, 7-1/2" minimum high. A propane cylinder kept in an enclosure needs ventilation openings sized per the installation manual.
-
Location and ventilation: For outdoor use only, in a well-ventilated space; never in a building, garage or other enclosed area. Permitted locations: walls on the back and one side with no overhead cover; under an overhead cover with no more than two side walls; or under an overhead cover with three side walls only if at least 30% of the horizontal perimeter stays permanently open (more if the openings are screened; see the manual).
-
Gas input (BTU/hr): Natural gas 55,000 max / 38,500 min; propane 55,000 max / 34,500 min. Above 2,000 ft elevation, reduce the rating 4% per 1,000 ft.
-
Ignition power: Push-button spark ignition powered by an AA battery. Models with LED lighting need a 120V GFI-protected outlet at the valve end of the fire pit.
-
Installation: Must be installed by a qualified installer per the installation manual and local codes.
Options & Accessories
Click to see Drain Tray
|
- Material: Stainless Steel
- Type: Drain Tray
- Stainless steel tray allows water to readily drain
- Helps to prevent the growth of mildew and mold
- For use with Carol Rose 48 and 60 Inch Linear Fireplaces
- Protects burner and ignitor assembly from corrosion
|
Click to see Weather Cover
|
-
Material: Stainless Steel
-
Type: Weather Cover
-
Weight: 14 lbs
- Prevents precipitation from damaging fire pit components when not in use.
- Dual grab handles for easy installation and removal.
- For use with Carol Rose OL48TP10 and OL48TP18 linear fire pits
- It can be used in conjunction with WG484LT wind deflector kit
|
Click to see Wind Deflector Glass
|
-
Material: Glass
-
Type: Wind Deflector Glass
-
Size: 48"
- Prevents sporadic flame outages in high wind conditions.
- Four piece tempered glass kit with corner braces.
- Designed to fit 48-inch Outdoor Linear Fire Pits
|
Click to see Stainless Steel LP Door Caddy
 |
- Type: LP Tank Door
- Material: Stainless Steel
- Tilt Out LP Tank Door
- For use with Outdoor 48” & 60” Linear Fire Pit
- Allows easy access to propane tank enclosures
|
Click to see Decorative Media
LED-equipped systems require clear or translucent crushed glass to cover the burner and lighting system. Additional colors and shapes may be added as accents. Non-LED systems may use any color crushed glass.

Register Kit, Stainless Steel, (inc 2 registers)
 |
- Material: Stainless Steel
- Type: Register Kit
- Allows vital combustion and cooling air to enter fire pit enclosures
- Contains two registers per kit
- For use with Outdoor 48” & 60” Linear Fire Pit
|
|
Fuel Conversion Kit
- Natural Gas to Propane
- Propane to Natural Gas
- For Carol Rose Outdoor Linear Fire Pit
|
/