Empire Boulevard Linear 36" Vent Free Gas Fireplace

Choose the Empire Boulevard Linear 36" Vent Free Gas Fireplace or Boulevard 48 single-sided (32,000 BTUs). All systems are available in Propane and Natural Gas.

The Empire Boulevard Linear 36" Vent Free Gas Fireplace comes with your choice of Millivolt Ignition System, or an Intermittent Pilot Ignition. The millivolt system features a piezo igniter and a standing pilot, eliminating the need to run electrical wiring. The intermittent pilot system features an electronic ignition with no standing pilot.

Features

• Product Dimensions: 42 3/16" W x 22 1/2" H x 11" D
• Intermittent pilot ignition includes battery back-up and multi-function thermostatic remote
• Millivolt ignition comes with On/Off remote
• Up to 28,000 BTU
• Optional Log Set
• Requires + 8-lbs of media sold separately
• Optional Liners
• Optional Light Kit
• Weight: 87.00 lbs
• Crushed Glass may be installed with or without the log set (use about 2 sq. ft.)
• Includes:
  • Barrier
  • Thermostat Remote (IP Models) or ON/OFF Remote (Millivolt Models)
  • Battery Relocation Kit (IP models)

A fine mesh barrier screen comes standard with each model.

Boulevard 36-inch Linear Fireplace with Black Porcelain Liner, Clear Crushed Glass, and 1-1/2-inch Beveled Front in Matte Black

Boulevard 48-inch Linear Fireplace with Stainless Steel Liner, Clear Crushed Glass, and 3/4-inch Trim in Matte Black

PROFLAME - IP CONTROL SYSTEM REMOTE (included with IP Model)

TRANSMITTER (REMOTE CONTROL WITH LCD DISPLAY) The Proflame Transmitter uses a streamline design with a simple button layout and informative LCD display. The Transmitter is powered by 3 AAA type batteries. A Mode Button is provided to Index between the features and a Thermostat Button is used to turn on/off or index through thermostat functions.

FRBC - ON/OFF REMOTE CONTROL (included with Millivolt Model)

FRBC - BATTERY OPERATED ON/OFF REMOTE CONTROL Turn burner OFF and ON using two-button handheld remote (Adjust flame from low to high using knob on the valve) Does not require running wire to the fireplace Operates during power outages

What to Order With It

Optional – Crushed glass (about 2 sq. ft. for the 36"; not required on this size):

• Crushed Glass, Clear Frost, approx. 1 sq. ft. (DG1CLF)
• Crushed Glass, Copper Reflective, approx. 1 sq. ft. (DG1BCR)
• Crushed Glass, Bronze Reflective, approx. 1 sq. ft. (DG1BZR)
• Crushed Glass, Blue Clear, approx. 1 sq. ft. (DG1BUC)
• Crushed Glass, Black Polished, approx. 1 sq. ft. (DG1BKP)

Optional – Accessories:

• Lighting Kit, 120 V, Req switch or rheostat (LK5)

Optional – Fronts and frames:

• Beveled Frame, .75-inch, Matte Black (DF361VBL)
• Beveled Frame, 1.5-in., Matte Black (DF362VBL)

Optional – Decorative media:

• Droplets, 1/2-in., Glacier Ice, approx. 1 sq. ft. (DG1GC)
• Decorative Rocks Assortment, approx. 1 sq. ft. (DR1FMA)
• Decorative Pebble Assortment, approx. 1/2 sq. ft. (DRFPA)
• Drops 1-in., Onyx Solid, approx. 1 sq. ft. (DG1NXS)

Optional – Liners:

• Liner with Burner Cover, Black Porcelain (VBP36LKR)
• Liner, Stainless Steel (Liner only) (VBP36LSS)
• Liner with Burner Cover, White Porcelain (VBP36LWR)

Documents

• Brouchers
• Installation Manual 

Installation Requirements

• Clearances to combustibles: 36" minimum to a perpendicular combustible side wall; 36" minimum to the ceiling and enclosure top
• Mantel clearance: Follow the mantel chart in the installation manual for any combustible mantel above the unit.
• Venting: Vent-free. No chimney, flue or vent pipe is required.
• Minimum room size: The room must have at least 50 cubic feet of volume per 1,000 Btu/hr of input (the manual's "unconfined space" rule). At the 28,000 Btu/hr maximum input that is at least 1,400 cubic feet.
• Bedrooms and bathrooms: Not permitted. The manual prohibits installing an unvented fireplace rated over 10,000 Btu/hr in a bedroom or bathroom (over 6,000 Btu/hr in a bathroom). In the Commonwealth of Massachusetts, unvented propane and natural gas-fired space heaters are prohibited in bedrooms and bathrooms.
• Gas input (BTU/hr): Natural gas 28,000 max / 19,000 min; propane 28,000 max / 22,000 min (millivolt and intermittent pilot models alike)
• Power: The remote receiver on intermittent pilot models (FP90) uses 4 AA batteries. The manual lists a 120V, 60Hz, 1 Amp electrical supply for lights.
• Installation: Must be installed by a qualified installer per the installation manual and local codes.