The DuraVent 8DT-E30 DuraTech 8-Inch Diameter 30 Degree Elbow Kit provides a high quality kit for your DuraTech chimney system. The elbow kit includes (2) elbows and (1) elbow strap. Use for offsets around obstructions such as rafters, ridgepoles, or joists. May have two pairs of elbows, if needed. Offsets greater than 30° are not permitted in accordance with UL 103 standards. Elbows swivel 360° at base (angles are not adjustable). A pair of elbows is required to return an offset chimney back to vertical. Available in stainless steel or galvanized steel.

DuraTech is a double-wall chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood. DuraTech is designed for normal, continuous operation at 1,000 degree flue gas temps. NOTE: Venting components should be installed by a licensed installer in accordance with local codes and within the manufacturer's specified guidelines as noted in your appliance's installation manual.

Features

• Pipe Class - Class A Chimney Pipe
• Designed For Use With - Wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas, and zero-clearance fireplaces that are factory-built
• Certifications - UL 103 HT and ULC S604 (MH7399) listed
• Includes - Kit includes (2) elbows and (1) elbow strap

Specification

Downloads

• Product Catalog
• Typical Chimney Installations
• Product Installation Instructions

Warning: This product can expose you to Chromium, which is known in the state of California to cause cancer, congenital disabilities, or other reproductive harm. For more information, see CA Prop 65 Warning